- “Nicolai 20 Series Profile 4-2020 1/2Gas G6 AR20 Top & Bottom Aris 4mm IGLO” already exists in your wishlist
-
Ever Clean
Oil and water repellent sealer, antinfiltration, for the protection of marble, granite, natural stone.
For:
Oil and water repellent treatment, antinfiltration and antistain, for marble, granite, natural stones, travertine and all kind of polished, grinded, rough, bush-hammered, flamed porous stone material
Main properties:
Very good antinfiltration and antistain protection against the penetration of water, oil, grease
• Particularly suitable for the protection of white and delicate marbles
How to use: Apply evenly on the clean and dry surface with a clean cotton cloth avoiding the accumulating of excess of product. Request the Technical Data Sheet.
Technical data: Solvent based liquid product. Contains: organic polymers and solvents.
Density at 23°C (73.4°F): 0,86 kg/l.Consumption: to be considered from 8 to 10 sqm. per litre.
Complete protection 24 hours after the final application. Storage: far from heat sources; avoid temperatures lower than +5°C (41°F) and higher than +35°C (95°F).
Packaging: 1Lد.إ75.00د.إ80.00Ever Clean
د.إ75.00د.إ80.00 -
Multigranit Plus
Oil and water repellent sealer, antistain, of permanent action for granite
For:
Oil and water repellent treatment, antinfiltration and antistain • Specific for quarzite and granite
Main properties:
Very good antinfiltration and antistain protection against the penetration of water, oil and grease • Not film-forming • Permanent protective action
How to use: On the perfectly clean and dry surface, apply evenly with a clean cotton cloth avoiding the accumulating of excess of product. Request the Technical Data Sheet.
Technical data: Product containing organic polymers and solvents. Density at 23°C (73.4°F): 0,90 kg/l. Consumption: to be considered from 8 to 10 sqm. per litre.
Complete protection 24 hours after the final application.
Storage: far from heat sources; avoid temperatures lower than +5°C (41°F) and higher than +35°C (95°F).
Packaging: 5Lد.إ950.00د.إ975.00Multigranit Plus
د.إ950.00د.إ975.00 -
Revstone
Oil and water repellent sealer of intense reviving effect. “Wet effect”.
For:
Protection and reviving of any kind of porous material such as marble, granite, natural stone and particularly flamed, brushed, grinded and sandblasted surfaces.
Main properties:
Very good oil and waterproofing protection and reviving of the natural colour with intense “wet effect” • Enhancement of the natural colours and veins of the stones. • Stable to the atmospheric agents, not turning yellow, it’s ideal for applications outdoor • Makes the surfaces anti dirt hindering the formation of stains and the build up of smog and moulds
How to use: The surface must be clean and dry and without trace of alien substances and friable parts.
Apply evenly on the clean and surface with a clean cotton cloth avoiding the accumulating of excess of product. Request the Technical Data Sheet.
Technical data: Product containing synthetic polymers, natural substances, organic solvents.
Density at 23°C (73.4°F): 0,94 kg/l. Consumption: from 100 to 200 g/sqm. according to the absorption of the material. Protection completely developed 24 hours after the final application.
Storage: far from heat sources; avoid temperatures lower than +5°C (41°F) and higher than +35°C (95°F).
Packaging: 1 Lد.إ110.00د.إ125.00Revstone
د.إ110.00د.إ125.00 -
Rain Stop
Water repellent sealer, antismog, antimould. For:
Water repellent protection of any kind of porous material such as marble, granite, natural stone, terracotta, cement agglomerates
Main properties:
Very good waterproofing and anti-mould protection • High resistance to the alkaline environments • Not film-making
How to use: Apply evenly on the clean and dry surface with a clean cotton cloth avoiding the accumulating
of excess of product on the surface. For white or light colours or crystalline marbles use Ever Clean or Imperston. Request the Technical Data Sheet..
Technical data: Product containing silicon compounds and solvents. Density at 23°C (73.4°F): 0,952 kg/l. Consumption: from 8 to 12 sqm. per litre. Complete protection 24 hours after the final application. Storage: far from heat sources; avoid temperatures lower than +5°C (41°F) and higher than +35°C (95°F).
Packaging: 1Lد.إ65.00د.إ75.00Rain Stop
د.إ65.00د.إ75.00 -
Super Binder 211
Protecting agent against the climbing up of the humidity and for improving the adhesion capacity.
For:
Protection against the climbing up of the humidity • Improvement of the adhesion • Specially suitable for laying, marble, granite, natural stones, gres porcelain tiles and big size tiles both indoor and outdoor
Main properties:
Bars the upward humidity and the climbing up of stains from the background • Easy to use •Promoter of adhesion
How to use: Apply by paint-brush the undiluted product to the back side of the tiles and lay immediately. Apply the tiles before the product dries. Request the Technical Data Sheet.
Technical data: Micronized anionic emulsion of copolymer. Average consumption: 100-150 gr./sqm. Application temperature between + 5°C and + 35°C (41°F and 95°F).
Packaging: 5Lد.إ175.00د.إ200.00Super Binder 211
د.إ175.00د.إ200.00 -
Old Age
Oil-waterproofing sealer, reviver with “wet effect” for a fascinating antique effect for marble, travertine, granite, stone.
For:
Giving an antique look and for reviving the colours, with natural wet effect, to the
surfaces • Suggested for application to rough, sandblasted, flamed, brushed, honed surfaces.
Main properties:
Enhances the colour shades and the natural veins of the materials • Suitable for outdoor and indoor applications.
How to use:
Apply evenly on the clean and dry surface with a clean cotton cloth or tampon avoiding that excess of product dry on the surface. Follow the instructions contained in the box and the instructions on the packaging/can. Professional product. Request the Technical Data Sheet.
Technical Data:
Solvent base product. Colourless . Density at 23°C (73.4°F): 0,91 kg/l.
Packaging:
1 Lد.إ125.00د.إ135.00Old Age
د.إ125.00د.إ135.00 -
Vernicetta
Liquid self-polishing product that intensifies the colour of marble and granite. It forms a very thin shiny and transparent plastic film, which doesn’t turn yellow and doesn’t crack. The particular com-position of VERNICETTA allows a fast drying of the product, so it facilitates the later workings.
It is suitable to be used on edges, borders and surfaces hard to be reached, to make the stone sur-face sparkle again.Attention: shake the product before using it.
YIELD
The yield varies from 15 to 30 sqm/lt depending on the finishing and kind of material.
د.إ65.00د.إ75.00Vernicetta
د.إ65.00د.إ75.00 -
Step
STEP is a formulation based on branched polydimethylsiloxane and fluorinated polymers in solvent solution.
The product, in addition to giving good hydro protection and discreet oil-repellent protection, gives the treated support a shine typical of silicone waxes.
The advantage of the product is its full reversibility using the Solv / Ics detergent produced by Ke-mistone for its quick removal.STEP can be used on almost all surfaces (stone, stone in general, ceramic and concrete with glos-sy finishes) without particular contraindications, being careful to protect the surfaces that must not be treated or sensitive parts such as painted, natural aluminum, wood etc. with plastic film.
YIELD
The yield is quantified from 10 to 90 square meters per kg depending on the type of material to be treated.
د.إ45.00د.إ55.00Step
د.إ45.00د.إ55.00 -
SteepLock
SteepLock is a product mixed in distilled aromatic hydrocarbon solvents with a low olfactory sensa-tion with excellent hydro-oil repellency characteristics. The product is also particularly recommended as a preventive solution against the formation of saline efflorescence, molds, algae and for the pre-vention of halos caused by acid rain.
SteepLock is used for the protection of kitchen countertops, floors and walls in marble, stone, grani-te, porphyry, travertine and building or furnishing cements.
The characteristics of the product are: high stability to alkaline supports and UV rays; excellent abili-ty to penetrate into the substrates subject to treatment; low permeability to water vapor, therefore do not use on surfaces with thrust humidity; absence of harmful by-products on the treated support; normally no chromatic variation of the treated surfaces.It is advisable to carry out preliminary tests before carrying out the definitive treatment.
Its protective action is long-lasting.YIELD
From 10 to 15 sqm / liter on brushed flamed bush-hammered surface
From 20 to 25 sqm / liter on a glossy surface
د.إ75.00د.إ85.00SteepLock
د.إ75.00د.إ85.00 -
DeRUST
DeRUST is an acid based formulation that allows to remove rust stains from granites; it is particularly suitable to neutralize iron elements present in the materials that take on a yellowish colouring with the exposition to the atmospheric agents; this colouring alters its features.
DeRUST is used on materials with higher rust concentration and more linked to stone substrate as: gneiss, Serizzo, Luserna and some granites of Chinese and Indian origin.
We suggest to evaluate the efficacy of DeRUST in advance, using a sample of material and apply the product leaving it about half an hour and then warm up with a flame up to the complete drying of the surface. If the rust stain disappears it is possible to carry out the treatment on the whole material; on the contrary, consult the technical service of KEMISTONE.د.إ150.00د.إ175.00DeRUST
د.إ150.00د.إ175.00 -
Smacstain
It removes oily stains
Features
Smacstain is a mix of solvents and absorbent fillers, suitable to remove grease and oil stains from tables, countertops, bar tops, floorings in marble, granite, stone, quartzites, limestones, shiny and opaque. Even with only one application of Smacstain it is pos-sible to remove fresh or surface stains, while for the deepest ones it is necessary to repeat the treatment. For all operations that involve a contact with the prod-uct, you have to provide yourselves with protective equipment (glasses and rubber gloves).
Yeld
It is not possible to calculate the consumption of the product per sq.m, as there are lots of variables result-ing from the type of materials, finishings and smudg-ing substances.د.إ150.00د.إ165.00Smacstain
د.إ150.00د.إ165.00 -
Sterminator
Biocide cleaner of mosses, algae and lichens.
Features
Water soluble cleaner to remove mosses and blackenings due to scales of lichens on stone materials be-cause of steady humidity, adverse exposures, excess of shadow areas, significant exposure to rainwater. Sterminator acts efficiently on any kind of stone material, without damaging or staining the treated surface. It totally removes the residues of fresh or encrusted mosses over time, both on the surface and deeply, penetrating into the stone support and taking the surface back to its original appearance.
Its balanced formulation allows its application on any kind of stone support: marbles, granites, beole, sand-stones, volcan stones, slates and cement conglomerates, exposed concrete, white and colored plasters. Sterminator is the product of choice for the external building maintenance.
Yeld
It is not possible to calculate the product consumption per sq.m.
The great variety of supports, finishings and materials requires a specific estimate.Packing:
1KG and 5 KG
Price range: د.إ75.00 through د.إ350.00Sterminator
Price range: د.إ75.00 through د.إ350.00
