-
Aardwolf Miter Clamp MC250
General
The Aardwolf Miter Clamp is a jig used for fitting and gluing mitred panels with an angle of 90 degrees. It features a suction cup that firmly attaches the miter clamp to the top of the slab. The clamp allows the worker to make fine adjustments for tight and exact seams.
Features
- Miter side-up slab with an angle of 90 degrees
- No flipping, protecting material from breakage
- No extra assistance required for keeping slabs
- Automatically squares the miter
- Fine-tune, simple and efficient adjustments of miter clamp
- Non-marking and non-sliding hold on material in tight places
- Suction cup for a trusty clamp on materials
- Aluminium construction with powder-coated finish
Note: Sold in pairSpecifications
Metric(mm-kg)Imperial(inch-lb)Grip range 50 – 250 2” – 10” Cup diameter 118 4.6 Net weight 3.9 9 Gross weight 4.4 10 Packaging dimension 420x230x250 16.5”x9”x9.8” د.إ1,350.00د.إ1,400.00Aardwolf Miter Clamp MC250
د.إ1,350.00د.إ1,400.00 -
Aardwolf Corner Clamp ACC250
General
Constructed of cast aluminium, Aardwolf Corner Clamps are designed to hold corner joints together in a secure manner. With fast installation and quick-release jaws, this corner clamp provides an easy-to-use solution for gluing and stapling work pieces.
Features
- Fast, precise, 90-degree corner clamping
- Secure hold on work pieces
- Simple clamp adjustment
- Cast aluminium construction
Note: Sold in pairSpecifications
Metric(mm-kg)Imperial(inch-lb)Grip range 50 – 250 2” – 10” Net weight 7 15 Gross weight 8 18 Packaging dimension 520x310x270 20.5”x12.2”x10.6” د.إ2,200.00د.إ2,250.00Aardwolf Corner Clamp ACC250
د.إ2,200.00د.إ2,250.00 -
Miter Clamps – Vacuum Assisted, Aardwolf ABMC
General
Face up mitering with the speed and ease you would expect from Aardwolf. Capable of handling bird beak edges as well as 45 degree miters. The Miter Clamps – Vacuum Assisted consists of vacuum unit, which consists of battery operated vacuum pump together with vacuum reserve tank, pressure switch and vacuum gauge and four vacuum pads, (two corner pads and two single pads) together with legs containing threaded adjustments rods and rest arms for supporting aprons.
Features
- Heavy duty vacuum pads provide a strong hold: essential for a proper glue up.
- Slide button to get the rest arm in close proximity to your apron width.
- Threaded levelling adjustments, up and down as well as in and out allowing the ability to finely adjust the level of the edge material.
- Easy to use knobs ensure proper clamping pressure.
- Miter pieces are installed finished side up and out so that you can see the seam and work with the glue for a finished piece.
Specifications:
- Net weight: 12 kg
- Gross weight: 13 kg
- Packaging dimensions: 520 x 310 x 270 mm
Note:
- Sold in set: two miter clamps and two corner clamps + battery-operated vacuum pump
د.إ6,000.00د.إ6,100.00Miter Clamps – Vacuum Assisted, Aardwolf ABMC
د.إ6,000.00د.إ6,100.00 -
Sinkloc CTTS24
General
Ideal tool for quick, precise positioning and temporary holding of under-mount sink bowls, enabling easy, one-person installation.
Lightweight aluminum frame. Rubber bottom to protect countertop surfaces. Push the button thread release T-nut for the quick positioning of the nut on a hanging rod.Specifications
Metric(mm-kg)Imperial(inch-lb)Grip range 0 – 450 0 – 17” Net weight 1.94 4 Gross weight 2.34 5 Packaging dimension 690x180x90 27.2”x7.1”x3.5” د.إ300.00د.إ350.00Sinkloc CTTS24
د.إ300.00د.إ350.00 -
Ratchet Seam Setter (Includes Wooden Case) CTTRSS1
General
Positions countertops horizontally and vertically. Dual-action ratcheting handle allows horizontal adjustments to tighten or loosen joints. Also a very handy tool for joining/gluing colored marble panels that have broken on a mud vein.
Specifications
Metric(mm-kg)Imperial(inch-lb)Net weight 6 13 Gross weight 8 18 Packaging dimension 440x340x160 17.3″x13.4″x6.3″ د.إ1,200.00د.إ1,300.00Ratchet Seam Setter (Includes Wooden Case) CTTRSS1
د.إ1,200.00د.إ1,300.00 -
Lamination Rail Clamp
Lamination Rail Clamp 10 Inch CTTBC10
Lamination Rail Clamp 2′ (610mm) CTTBC2
Lamination Rail Clamp 3′ (915mm) CTTBC3
Lamination Rail Clamp 4′ (1220mm) CTTBC4
Lamination Rail Clamp 6′ (1830mm) CTTBC6General
The Lamination Rail Clamp has a unique purpose and function in the marble and granite workshops. Designed for laminating edge strips, the Lamination Rail Clamp cut clamping time by 75% or more, increase production and improve the quality of joints. The Lamination Rail Clamp is now an indispensable tool for the professional fabricator. Fabricators who have used the Lamination Rail Clamp never want to go back to the days of C-clamps again.
Features
- The longer length bar clamps include a spring-loaded holding jaw, which keeps the clamp in place during alignment of edge strips
- Clamp threads are concealed, protecting them from epoxy contamination
- Large, easy-grasp tightening handles
- Made from extruded anodized aluminum, stainless steel, and zinc-plated steel
د.إ175.00 – د.إ950.00Lamination Rail Clamp
د.إ175.00 – د.إ950.00 -
Anti-Breakage Bar 4′ (1220mm) CTTABB4
General
Anti Breakage Bars are stiffening bars that prevent the breakage of fragile stone pieces during lifting, moving and installation. Quick and easy to attach to workpieces, these rubber lined bars eliminate the risk and danger of breaking expensive marble and granite workpieces.
Features
- Rubber-lined bar and clamp jaw
- Large hand knobs for easy tightening of clamps
- Sliding channel for individual placement of clamps
- Made from extruded anodized aluminum, stainless steel, and zinc-plated steel
- Sold in pairs
Specifications
Metric(mm-kg)Imperial(inch-lb)Grip range 17 – 45 0.7” – 2” Length 1220 48 Net weight 8.4 19 Gross weight 9 20 Packaging dimension 1260x180x140 49.6”x7.1”x5.5” د.إ850.00 – د.إ1,300.00Anti-Breakage Bar 4′ (1220mm) CTTABB4
د.إ850.00 – د.إ1,300.00 -
Battery Joint Setter BOSS
General
The Battery Joint Setter is designed to close gaps between two pieces of slabs and pull them together. This device works well on stone and glass with non-porous surfaces. It can be quickly closed or opened by simply moving the roller nut with the palm of your hand. The two vacuum bases are aligned with precision steel guide axles. These axles are anchored on each side with a main axle and two sub axles. When the roller rotates, one vacuum base will move along two sub axles and pull two pieces of slabs together. One balance bar with two leveling knobs allows surfaces to be leveled precisely. With the battery-operated vacuum pump, an equal vacuum is maintained in both pads during the working process.Features
- Powered by a 12V-1500mAh battery
- Light and compact design
- Easy and convenient to use
- Two leveling knobs keep the joints flush
- The fast and powerful tightening mechanism
- Close or open seams by easily rotating the roller nut with your palm
- Battery-operated vacuum pump
- Integrated exhaust valve to release the vacuum
- Number of vacuum bases: 2
- Vacuum base sizes: 230×190 mm (9” x 7.5”)
Specifications
- Net weight: 15.5 kg
- Gross weight: 19.3 kg
- Packaging dimensions: 600 x 290 x 280
Note: Sold in set: two pairs of Joint Setter and battery-powered vacuum pump.
د.إ5,600.00د.إ5,700.00Battery Joint Setter BOSS
د.إ5,600.00د.إ5,700.00 -
Electric Joint Setter EOSS
General
The Electric Joint Setter is designed to close gaps between two pieces of slabs and pull them together. This device works well on stone and glass with non-porous surfaces. It can be quickly closed or opened by simply moving the roller nut with the palm of your hand. The two vacuum bases are aligned with precision steel guide axles. These axles are anchored on each side with a main axle and two sub axles. When the roller rotates, one vacuum base will move along two sub axles and pull two pieces of slabs together. One balance bar with two leveling knobs allows surfaces to be leveled precisely. With the electric-operated vacuum pump, an equal vacuum is maintained in both pads during the working process.Features
- Light and compact design
- Easy and convenient to use
- Two leveling knobs keep the joints flush
- The fast and powerful tightening mechanism
- Close or open seams by easily rotating the roller nut with your palm
- Electric-operated vacuum pump
- Integrated exhaust valve to release the vacuum
- Number of vacuum bases: 2
- Vacuum base sizes: 230×190 mm (9” x 7.5”)
Specifications
- Net weight: 17 kg
- Gross weight: 25 kg
- Packaging dimensions: 710 x 320 x 250 mm
Electric information for the device
- Max. vacuum: -630 mm Hg
- Max. flow: 23 l/min
- Motor rotation: 1750 RPM
- Horsepower: 1/8 HP
- Noise level: 50.DdB
- Powered by 220V/50Hz
Note: Sold in set: two pairs of Joint Setter and electric powered vacuum pump.
Shop By Catagory
- Aardwolf-Frames
- Art Equipment
- Battipav
- Bush Hammering
- Electroplated Profiling
- Floor Polishing Machinery
- Forklift Equipment
- Grinding Tool
- Grooving Disc
- JIB Cranes
- Lifting & Clamp
- Montolit
- Polishing Powders & Wax
- Polishing Stones
- Polishing-Pads
- Power Tools & Machinery
- Automatic Polishing
- CNC Tools-woosuk
- Cutting Grinding & Shaping
- Floor Polishing
- General Chemical
- ILPA
- Kemistone
