-
Vernicetta
Liquid self-polishing product that intensifies the colour of marble and granite. It forms a very thin shiny and transparent plastic film, which doesn’t turn yellow and doesn’t crack. The particular com-position of VERNICETTA allows a fast drying of the product, so it facilitates the later workings.
It is suitable to be used on edges, borders and surfaces hard to be reached, to make the stone sur-face sparkle again.Attention: shake the product before using it.
YIELD
The yield varies from 15 to 30 sqm/lt depending on the finishing and kind of material.
د.إ65.00د.إ75.00Vernicetta
د.إ65.00د.إ75.00 -
Step
STEP is a formulation based on branched polydimethylsiloxane and fluorinated polymers in solvent solution.
The product, in addition to giving good hydro protection and discreet oil-repellent protection, gives the treated support a shine typical of silicone waxes.
The advantage of the product is its full reversibility using the Solv / Ics detergent produced by Ke-mistone for its quick removal.STEP can be used on almost all surfaces (stone, stone in general, ceramic and concrete with glos-sy finishes) without particular contraindications, being careful to protect the surfaces that must not be treated or sensitive parts such as painted, natural aluminum, wood etc. with plastic film.
YIELD
The yield is quantified from 10 to 90 square meters per kg depending on the type of material to be treated.
د.إ45.00د.إ55.00Step
د.إ45.00د.إ55.00 -
SteepLock
SteepLock is a product mixed in distilled aromatic hydrocarbon solvents with a low olfactory sensa-tion with excellent hydro-oil repellency characteristics. The product is also particularly recommended as a preventive solution against the formation of saline efflorescence, molds, algae and for the pre-vention of halos caused by acid rain.
SteepLock is used for the protection of kitchen countertops, floors and walls in marble, stone, grani-te, porphyry, travertine and building or furnishing cements.
The characteristics of the product are: high stability to alkaline supports and UV rays; excellent abili-ty to penetrate into the substrates subject to treatment; low permeability to water vapor, therefore do not use on surfaces with thrust humidity; absence of harmful by-products on the treated support; normally no chromatic variation of the treated surfaces.It is advisable to carry out preliminary tests before carrying out the definitive treatment.
Its protective action is long-lasting.YIELD
From 10 to 15 sqm / liter on brushed flamed bush-hammered surface
From 20 to 25 sqm / liter on a glossy surface
د.إ75.00د.إ85.00SteepLock
د.إ75.00د.إ85.00 -
DeRUST
DeRUST is an acid based formulation that allows to remove rust stains from granites; it is particularly suitable to neutralize iron elements present in the materials that take on a yellowish colouring with the exposition to the atmospheric agents; this colouring alters its features.
DeRUST is used on materials with higher rust concentration and more linked to stone substrate as: gneiss, Serizzo, Luserna and some granites of Chinese and Indian origin.
We suggest to evaluate the efficacy of DeRUST in advance, using a sample of material and apply the product leaving it about half an hour and then warm up with a flame up to the complete drying of the surface. If the rust stain disappears it is possible to carry out the treatment on the whole material; on the contrary, consult the technical service of KEMISTONE.د.إ150.00د.إ175.00DeRUST
د.إ150.00د.إ175.00 -
Carborust
FEATURES
CARBORUST is a fluid gel that is used for the elimination of contact rust on stones and marbles with a composition based on calcium carbonate where normal acid formulations can cause burns on the surface.
This product eliminates oxidation without ruining the surfaces and maintaining the graphic characteristics of the surface subject to stain removal.Yield
The yield of the material is purely theoretical
د.إ175.00د.إ185.00Carborust
د.إ175.00د.إ185.00 -
Smacstain
It removes oily stains
Features
Smacstain is a mix of solvents and absorbent fillers, suitable to remove grease and oil stains from tables, countertops, bar tops, floorings in marble, granite, stone, quartzites, limestones, shiny and opaque. Even with only one application of Smacstain it is pos-sible to remove fresh or surface stains, while for the deepest ones it is necessary to repeat the treatment. For all operations that involve a contact with the prod-uct, you have to provide yourselves with protective equipment (glasses and rubber gloves).
Yeld
It is not possible to calculate the consumption of the product per sq.m, as there are lots of variables result-ing from the type of materials, finishings and smudg-ing substances.د.إ150.00د.إ165.00Smacstain
د.إ150.00د.إ165.00 -
Sterminator
Biocide cleaner of mosses, algae and lichens.
Features
Water soluble cleaner to remove mosses and blackenings due to scales of lichens on stone materials be-cause of steady humidity, adverse exposures, excess of shadow areas, significant exposure to rainwater. Sterminator acts efficiently on any kind of stone material, without damaging or staining the treated surface. It totally removes the residues of fresh or encrusted mosses over time, both on the surface and deeply, penetrating into the stone support and taking the surface back to its original appearance.
Its balanced formulation allows its application on any kind of stone support: marbles, granites, beole, sand-stones, volcan stones, slates and cement conglomerates, exposed concrete, white and colored plasters. Sterminator is the product of choice for the external building maintenance.
Yeld
It is not possible to calculate the product consumption per sq.m.
The great variety of supports, finishings and materials requires a specific estimate.Packing:
1KG and 5 KG
د.إ75.00 – د.إ350.00Sterminator
د.إ75.00 – د.إ350.00 -
ACID ONE
Antiquing and revitalizing acid cleaner
Features
Acid One is a mix of inhibited acids suitable to wash and treat surfaces in marble, granite, rough stone, sandstone.
The product removes the working residues on the surface by highlighting at the same time its natural colors.
Ideal to remove whitish working residues, concrete or sealant residues as well as the ones from li-mescales and salt efflorescences.
Acid One can be laid with excellent results on marbles with sandblasted, bush-hammered, crack, disc cutting, tumbled finish.
The product is particularly suitable for surfaces to be given antiqued thanks to its capability to remove bleaching and leaving the sand-blasting unchanged.Acid One is generally used in yards: construction companies, quarry stones floor layers, companies in charge of the cleaning of end- yard.
Yeld
Its yield can change according to the kind of intervention to carry on: from 2 to 20 sq.m/Kg.د.إ75.00د.إ85.00ACID ONE
د.إ75.00د.إ85.00 -
Sabbiatore Orange
Aging effect solution for marbles and stains
Features
SABBIATORE ORANGE 1Kg-5Kg is an acid-based formulation that allows to modify many marbles and stains aesthetically (both coloured and not), obtaining an aging effect; it is orange peel skin for ORANGE and DUNE, brushed effect for BALI and an aged finishing with furniture beetles for ANTIKO.
SABBIATORE forms a particular effect on the used materials as, kitchen countertops, floorings, staircases and coverings …
It is well applied on compact materials rich of calcium carbonate, as: Rosso Verona, Rosa Perlino, Trani, Travertino, Crema Marfil, Rosso Alicante…
Attention: shake the product before use.
Yeld
From 3 to 5 sq.m/lt.Packing:
1KG and 5 KG
د.إ75.00 – د.إ350.00Sabbiatore Orange
د.إ75.00 – د.إ350.00 -
Microstone
MICROSTONE
It removes minute excoriations and intensifies the color
Features
It is a product suitable for the treatment of colored marbles and granites that while processing, show color differences. As Microstone goes into depth, it gives color uniformity to the treated materials.It removes microcrashes and excoriations and gives brightness and depth by intensifying the natural color of the stones. Apart from these features, the product also gives a high water-repellent degree by improving the resistance of the treated materials to negativeness of weathering.
While testing the accelerated aging, Microstone confirmed its capability to last over time by keeping the properties of the materials intact.
Yeld
Its yield can change according to the compactness of the material to be treated.
Approximately from 30 to 90 sq.m/lt.د.إ130.00د.إ150.00Microstone
د.إ130.00د.إ150.00 -
Blackuet
Black corrector
Features
Black coloured primer, protector, that can create a lattice with the molecules of the treated support giving an homogeneous black colour. You get a particularly positive result on the brinks of the black granites that had been previously treated with All Black. The effect you get is very natural.
Blackuet is suitable for inner and outer surfaces, smoothed, sandblasted, flamed, brushed, bush hammered and for all the materials on which the processings have weakened the colors.
Blackuet is not stain-removal, therefore it is better to apply a light coat of JACKSOTNE and 30 minutes later to remove the excess (with a white felt).د.إ175.00د.إ185.00Blackuet
د.إ175.00د.إ185.00 -
Freerust Strong
It removes rust stains- extractor
Features
It is applied on materials with a very high rust concentration, above all if strictly connected to the stone sup-port (Beola, Serizzo, Luserna, and some granites of Indian and Chinese origin).
It is necessary to make a preliminary test by applying the product and let it act for 30 minutes, later heat with flame until the surface is totally dry.
If the result you get is the disappearance of the rust stain, so you can go on applying Freerust Strong on the whole material, otherwise contact the technical service of Kemistone.
Yeld
Its yield can change from 7 to 12 sq.m/lt and it is only approximate.Packing:
1KG and 5 KG
د.إ150.00 – د.إ700.00Freerust Strong
د.إ150.00 – د.إ700.00
Shop By Catagory
- Aardwolf-Frames
- Art Equipment
- Battipav
- Bush Hammering
- Electroplated Profiling
- Floor Polishing Machinery
- Forklift Equipment
- Grinding Tool
- Grooving Disc
- JIB Cranes
- Lifting & Clamp
- Montolit
- Polishing Powders & Wax
- Polishing Stones
- Polishing-Pads
- Power Tools & Machinery
- Automatic Polishing
- CNC Tools-woosuk
- Cutting Grinding & Shaping
- Floor Polishing
- General Chemical
- ILPA
- Kemistone
