Anti rising product for cotto, stones, concrete

Features

Stopsal Carbo/Sil is a protective primer with water-oil repellent function, studied to protect surfaces in cotto, exposed concrete and stone materials with limestone composition like the stones of Egyptian origin that have high concentrations of salts and show little surface breakpoints with gloss loss. Using Stopsal allows to remove or to limit the rising of salts on both inner and outer floorings, stairs or coatings.
Using Stopsal as a base protector limits considerably the consumption of a stain removal product by reducing applying and drying times. It does not change the natural color of the treated stones and it is invisible. It .does not turn yellow over time.

Yeld

It is not easy to calculate its yield, as the product must be applied in more coats, wet on wet, until the stone
absorbs it

Packing:

1KG and 5 KG

It removes rust stains- extractor

Features
It is applied on materials with a very high rust concentration, above all if strictly connected to the stone sup-port (Beola, Serizzo, Luserna, and some granites of Indian and Chinese origin).
It is necessary to make a preliminary test by applying the product and let it act for 30 minutes, later heat with flame until the surface is totally dry.
If the result you get is the disappearance of the rust stain, so you can go on applying Freerust Strong on the whole material, otherwise contact the technical service of Kemistone.
Yeld
Its yield can change from 7 to 12 sq.m/lt and it is only approximate.

Packing:

1KG and 5 KG

Anti-rising protector

Features

Ristop is a preparation created to prevent, while laying, rising of water and salts on floorings and coatings in marble, granite, quartzite, conglomerate and stones. The product must be applied on the inner side of the sheet and on all the sides directly in contact with the laying glues.
Ristop is compatible with any adhesive and therefore it does not compromise its glueing.
We recommend to make a test before proceeding on large surface areas.
This product solves the problem of spilling of stains, rings, efflorescences and oxidations caused by impurities in water because of the salt dissolution that are both in stone materials and in the glues used while laying, through the rising water, these come to the surface and stain it.
Ristop is a transparent, odorless product, and its use is particularly suitable for white marbles and applying on external floorings that are oftener subject to the above-mentioned problems.

Yeld

Its yield is rather variable in consideration of the types of supports on which it can be applied.
We indicate a yield of 1 liter of product for a surface of 8/10 sq.m, and it can be 1 liter of product for 10/20
sq.m for very compact materials.

Packing:

1KG and 5 KG