-
Air Stone Edge Profiling Machine Model-GPW-510A
FEATURES
- Lightweight.
- Muffler Tube, swivel 360 to avoid tubes tangle together.
- Rear Handle, support the machine when lift it up.
- Regulator for adjusting height of Diamond Disc Wheel (0~35m/m)
- Booster increases water flow pressure and strengthens floating power.
- PTFE plates with strong air injection, which features cratch resistance, excellent floating performance, and enables smoothly movement.
- Water feeds on slab for scouring residue of profile.
- Water floating power moving base doesn’t scratch stone.
- Fixing bolt instead of stop spanner, replace and adjust height of diamond disc easily.
- Flexuous water hose can scour the residue on diamond disc wheel.
د.إ8,850.00د.إ8,900.00Air Stone Edge Profiling Machine Model-GPW-510A
د.إ8,850.00د.إ8,900.00 -
EXPERT 600
EXPERT is a masonry saw ideal for the building sector.
Innovative design with high tech solutions, very precise, compact, light and strong, it’s suitable for cutting bricks, poroton blocks, marble blocks and all the different kind of materials for the building sector.
It makes cuts pushing the sliding working table and it is built to work with diamond disks Ø 600 mm or Ø 500 mm according the version.Equipped with:
– Three-phase engine 400V 50Hz 5,5Hp / 4Kw with thermal and amperometrical protection – Switch with release coil.
– Overheat protection with manual reset
– Sliding working table and tilting cutting head
– Adjustable legs
– Adjustable goniometer fence
– Water recycling pump type S3Water cooled
Disk Ø 600 mm not included.د.إ8,500.00د.إ9,000.00EXPERT 600
د.إ8,500.00د.إ9,000.00 -
Koala
Rugged single-brush floor polisher designed specifically for stone care. Ergonomic dual switch levers handle for operator comfort and ease of use with trouble-free performance. A planetary system with oil-lubricated gears. Rugged motor to tackle the most demanding tasks such as polishing/ scrubbing, concrete grinding, and carpet cleaning. Plastic water tank, pad driver, and nylon brush. Smooth and quiet operation. This versatile Single-brush Polisher does not require particular training.
Accessories
Plastic water tank
Electric cable
Driving pad
Nylon brushesOptionals
Polishing tools (for shine effect)
Sponges
Felts
Plate to hold polishing toolsTechnical Data
Item: 220001* / 22002**
MOD: KOALA BIG / KOALA BIG 430
Brush Diam mm: 430
kW-Volt: 1.1 – 230
Kg: 43
Clean Surface MQ/H: 250 / 375
Brush Speed RPM: 175
Voltage HZ: 50
Electric Cable MT: 15
Tank LT: 12 / 18* Aluminum plate and resin cover, without stopper and without the filter.
** Plate and cover in aluminum.The technical data herein mentioned are non-binding. They are for your guidance, only.
د.إ8,252.00د.إ8,500.00Koala
د.إ8,252.00د.إ8,500.00 -
Roker
Finish
> scratching step 5 mm
> scratching step 2,5 mmProcessing type
> on flat surfaces
> antiskidMaterial
> Marble/LimestoneRokers are tools for scratchig finish step 5 mm and 2,5 mm on marble and stones.
Rokers have removable inserts in order to vary their position and quantity. In this way it is possible to adjust the type and width of finish. Inserts are also designed to have a long life as they can be used in all its vertices by rotating them, thus multiplying the tool life.APPLICATION
Rokers can be fixed on every kind of bridge cutters or banner tile cutters with horizontal shaft.
PERFORMANCE
√ Easy installation and use.
√ Opportunity to work on thin or defective slabs.
√ Uniform finish over the whole slab surface.
√ Different kind of Scratching finish with only one tool.
√ High production with minimum investment.Price range: د.إ4,100.00 through د.إ8,100.00Roker
Price range: د.إ4,100.00 through د.إ8,100.00 -
SUPREME 120
SUPREME is a bridge saw ideal for cutting natural stones, granite and marble slabs.
It makes cuts moving forward manually the engine group.
It is built to work with diamond disk Ø300 mm.
Laser instrument and kit wheels are supplied standard or as optionals.Equipped with:
– Single phase engine 230V 50Hz 3Hp/2,2Kw with thermal and amperometrical protection
– Switch with release coil
– Overheat protection with manual reset
– Sliding cutting head and tilting engine
– Cutting progress system with hand wheel
– Adjustable legs
– Adjustable goniometer fence
– Water recycling pump type S3Disk Ø 300 not included.
Price range: د.إ6,000.00 through د.إ8,050.00SUPREME 120
Price range: د.إ6,000.00 through د.إ8,050.00 -
Dia-Roker
Finitura
> Graffiatura passo 5 mm
> Graffiatura passo 2,5 mmTipologia
> sul piano
> antiscivoloMateriale
> Graniti/arenariaI Dia-roker sono utensili per la graffiatura passo 5 mm e 2,5 mm su pietre e graniti.
I Dia-Roker montano degli inserti rimovibili per permettere di variarne la posizione e la quantità. Così facendo si regola il tipo e la larghezza della finitura. Gi inserti sono inoltre progettati per avere una lunga durata, in quanto capovolgendo gli inserti si possono utilizzare tutti i suoi vertici, moltiplicando così la vita dell’utensile.APPLICAZIONE
I Dia-Roker possono essere applicati a tutte le frese a ponte o a bandiera con albero orizzontale.
PERFORMANCE
√ Estrema facilità di montaggio e d’uso.
√ Possibilità di lavorare lastre sottili o difettose.
√ Graffiatura perfettamente uniforme su tutta la superficie.
√ Diversi tipi di graffiature con un solo utensile.
√ Alte produzioni con minimo investimento.Available: 300×100
د.إ7,500.00د.إ7,600.00Dia-Roker
د.إ7,500.00د.إ7,600.00 -
Vacuum Block Lifter
AVBL380
General
A powerful battery-operated vacuum lifting device for laying marble and granite slabs, concrete and similar. Robust and compact, the Vacuum Block Lifter AVBL380 can be suspended on all types of lifting equipment by means of load hooks, chains, cables, etc.Features
- Equipped with a battery-operated vacuum pump
- Different suction pads are available for alternative uses
- ON/OFF slide valve
- Audio/visual safety system: flashlight, vacuum gauge, vacuum storage tank
- The automatic vacuum pumping system
- Long working hours
- Battery charge indicator
- Manually operated valve for vacuum
Specifications
Metric(mm-kg)Imperial(inch-lb)Working load limit Pad sizes Kg
520×125: 120
520×160: 150
520×220: 240
520×320: 38020.5”x5”:265
20.5”x6.3”:331
520”x8.7”:529
20.5”x15”:838Net weight 55 121 Gross weight 68 150 Packaging dimension 585x385x530 23”x15”x20.9” - Battery information for the device
Battery capacity 12V-24A Standby time 720 hours Charging cycle 1000 times Charging time 8 hours Adapter DC 12V-3A Non-stop working time 5 hours 6-month warranty – - Motor information
Vacuum flow rate 32.5 liter/min Motor 12V-4A Different dimension vacuum plates made on request.
Note: For shipping, weight adds the weight of selected pads to package.د.إ7,450.00د.إ8,000.00Vacuum Block Lifter
د.إ7,450.00د.إ8,000.00 -
Barrier Lifter ABL-255 | 3000
General
The Aardwolf Barrier Lifter is the solution for lifting and moving heavy granite slabs, sandstone blocks and concrete barriers in a safe, easy and efficient manner. The material contact surface is protected by the clamping rubber covering. The clamp is gravity controlled, which opens when rested and closes when lifted.Features
- Auto locks and unlocks
- Vulcanized rubber pads
- Protective rubber-lined bar prevents the material from chipping
Specifications
Metric(mm-kg)Imperial(inch-lb)Grip range 100 – 255 4” – 10” Working load limit 3000 6614 Net weight 139 306 Gross weight 150 331 Packaging dimension 890x720x770 35”x28.3”x30.3” د.إ7,250.00د.إ7,400.00Barrier Lifter ABL-255 | 3000
د.إ7,250.00د.إ7,400.00 -
24 litre sandblasting machine
Free jet sandblasting machine with work kit, sand tank, d. 16×30 5 meter jointed abrasive hose, nozzle, sifter, d.8×17 5 meter jointed atoxic hose, aeration kit, M05 aerated helmet
د.إ7,000.0024 litre sandblasting machine
د.إ7,000.00 -
Horizontal Stone Lifting Clamp AHLC-1050
General
For lifting and moving of concrete blocks and natural stone. Long-lasting, high friction replaceable Polyurethane gripping pads protect load surfaces against damage. Suitable for use on cranes or forklift booms. Clamp jaws are gravity controlled. They open automatically on every second lift and close on every second lift.Features
- Adjustable jaw opening width
- A large gripping range, making it suitable for a wide range of applications
- Long-lasting, high friction replaceable Polyurethane gripping pads
- Lifting eye for attaching to a crane hook
- Auto locks and unlocks the load
Specifications
Metric(mm-kg)Imperial(inch-lb)Grip range 280 – 1050 11” – 41” Working load limit 1500 3307 Net weight 121 267 Gross weight 136 300 Packaging dimension 1500x530x360 59”x20.9”x14.2” د.إ6,960.00د.إ7,000.00Horizontal Stone Lifting Clamp AHLC-1050
د.إ6,960.00د.إ7,000.00 -
Mono Mechanical Vacuum Lifter
General
No power source required. Ideal for the horizontal handling of non-porous sheet and plate materials such as diamond sawn, polished granite, engineered stone, all types of metals, plastics, and fiberglass. It has a telescopic front handlebar and adjustable vacuum pads.
Features
- Self-powered and self-cycling
- Simple to operate
- Easy to maintain
- Able to handle a variety of sheet sizes
- Extremely safe. The load cannot be released until it is set down on the surface
- Capable of 100% duty cycle, 24 hours/day operation
- Audio alarm system powered by a non-rechargeable 9V battery
- Vacuum gauge for a visual warning of low vacuum
- Telescopic front handle
Specifications
Metric(mm-kg)Imperial(inch-lb)Number of pads 1 – Pad diameter Seal to seal: 530 21” Working load limit 1000 2204 Net weight 55 121 Gross weight 67 148 Packaging dimension 730x385x760 28.7”x15.1”x30” - Battery information
Power supply 9 V non-rechargeable 6-month warranty – Note: For materials with a rough surface texture, such as exfoliated granite, concrete, and textured metals, refer to our electric or air powered vacuum lifters with foam rubber pads.
د.إ6,950.00د.إ7,000.00Mono Mechanical Vacuum Lifter
د.إ6,950.00د.إ7,000.00 -
Mater Linda With Tank
The monobrush Master Linda is a high-performance product, suitable for cleaning, filling, smoothing, and polishing floors for the construction industry.
A full range of accessories to meet all needs.
The machine is arranged for the suction of powders and can be ballasted to increase weight, according to the using application.– Single-phase motor 230V~50Hz 2,5Kw
– Polypropylene brush Ø 500 mm. Art. 0959.Two rotation speeds
- Tank Capacity : 8 lt
- Speed Selector ii^ Gear : 120 rpm
- Whip Connection : Rapido Clark
- Engine Type : SINGLE-PHASE 230V~50Hz
- Machine’s Dimension: 510x620xH1400mm
- Pallet Dimension : 510x620xH1400mm
- Weight : 37 kg
- Pieces for Pallet : 4
- Machine’s Dimension for Transport : 510x620xH800mm
- Speed Selector i^ Gear : 60 rpm
- Motor Power i^ Gear : 1,3Hp / 1,0Kw
- Motor Power ii^ Gear : 3,4Hp / 2,5Kw
- Tank : Standard
- Rotation’s Direction of the Disk : Counterclockwise
- Side Ballast (2X 5KG) : Optional
د.إ6,950.00د.إ7,000.00Mater Linda With Tank
د.إ6,950.00د.إ7,000.00
Shop By Catagory
- Aardwolf-Frames
- Art Equipment
- Battipav
- Bush Hammering
- Electroplated Profiling
- Floor Polishing Machinery
- Forklift Equipment
- Grinding Tool
- Grooving Disc
- JIB Cranes
- Lifting & Clamp
- Montolit
- Polishing Powders & Wax
- Polishing Stones
- Polishing-Pads
- Power Tools & Machinery
- Automatic Polishing
- CNC Tools-woosuk
- Cutting Grinding & Shaping
- Floor Polishing
- General Chemical
- ILPA
- Kemistone
