-
Hammer Type-D
Patented “D” type micro hammer
- Weight : 90g
- Hits at 1 ‘ : 8500
- Piston diameter : 1/4 ″
- Tool entry: 5mm
The micro hammer is patented.
The tool must be held free-hand.
د.إ1,450.00د.إ1,500.00Hammer Type-D
د.إ1,450.00د.إ1,500.00 -
Hammer Type-A
Patented type “A” hammer for sculptures and engravings
- Weight : 430g
- Hits at 1 ‘ : 7000
- Piston diameter : 9/16 ″
- Tool entry: 12.5 mm
The tool must be held free-hand.
Announcements
On request, it is possible to supply it at the same price with a 7.5 mm diameter or 10.5 mm diameter ring nut.
د.إ1,450.00د.إ1,500.00Hammer Type-A
د.إ1,450.00د.إ1,500.00 -
Hammer Type-E
Patented type “E” hammer for engraving and finishing
- Weight : 240g
- Hits at 1 ‘ : 7200
- Piston diameter : 7/16 ″
- Tool entry: 7.5mm
The tool must be held free-hand.
د.إ1,400.00د.إ1,500.00Hammer Type-E
د.إ1,400.00د.إ1,500.00 -
Rollex
Finish
> rolling 2000 grain size
> rolling 1400 grain size
> rolling 800 grain size
> rolling 400 grain sizeProcessing type
> on flat surfaces
> edgesMaterial
> Marble/Limestone
> Granite/SandstoneRollex is tool for the rolling finish on marble, stone, and granite.
Rollex is made with an application of tungsten carbide grit of different sizes depending on the desired finish, in order to make a perfect rolling effect. The inserts of the Roker for the grinder are designed to have a long life as they can be used in all its vertices by rotating them, thus multiplying the tool life.APPLICATION
Rolling rollers can be applied to the grinder Bosh GPO 14 CE. They can also be applied on different grinders, but only on specific request. It is compatible with M 14 or 5/8″ attachment depending on the grinder on which it is applied.
PERFORMANCE
√ Easy to use.
√ Opportunity to work on thin or defective slabs.
√ Work is totally safety because the tool is always covered by protection.د.إ1,400.00د.إ1,450.00Rollex
د.إ1,400.00د.إ1,450.00 -
Rockany Injection Pump
The injection pump is a piston injection pump which al-low easy and fast injection of synthetic resin at a build up pressure above 150 to 400 bar in concrete cracks
د.إ1,400.00د.إ2,000.00Rockany Injection Pump
د.إ1,400.00د.إ2,000.00 -
Piko
Finish
> in line comma
> crossing comma
> 45° commaProcessing type
> on flat surfacesMaterial
> Marble/LimestonePiko is a tool for inline comma finish on marble and limestone.
Piko is designed to be a simple tool and with a heavyweight which offers the possibility to make inline comma finish, usually impossible with a portable tool due to the depth of the finish.APPLICATION
It can be applied to the grinder Bosh GPO 14 CE and Rupes LH32EN. It can also be applied to different grinders, but only on specific request. Piko is compatible with M 14 or 5/8″ attachment depending on the grinder on which it is applied.
PERFORMANCE
√ Easy to use.
√ Work in totally safety because the tool is always covered by protection.
√ Different kind of in line comma finishes with only one tool.د.إ1,360.00د.إ1,500.00Piko
د.إ1,360.00د.إ1,500.00 -
Hammer Type-P
The pneumatic pen is supplied complete with three widiam tools: a chisel, a step, and a tip. In addition to this, it is comprised of rubber and attachments.
- Weight : 90g
- Hits at 1 ‘ : 8500
- Piston diameter : 1/4 ″
- Tool entry: 5mm
The pneumatic pen is patented.
د.إ1,350.00د.إ1,400.00Hammer Type-P
د.إ1,350.00د.إ1,400.00 -
Aardwolf Miter Clamp MC250
General
The Aardwolf Miter Clamp is a jig used for fitting and gluing mitred panels with an angle of 90 degrees. It features a suction cup that firmly attaches the miter clamp to the top of the slab. The clamp allows the worker to make fine adjustments for tight and exact seams.
Features
- Miter side-up slab with an angle of 90 degrees
- No flipping, protecting material from breakage
- No extra assistance required for keeping slabs
- Automatically squares the miter
- Fine-tune, simple and efficient adjustments of miter clamp
- Non-marking and non-sliding hold on material in tight places
- Suction cup for a trusty clamp on materials
- Aluminium construction with powder-coated finish
Note: Sold in pairSpecifications
Metric(mm-kg)Imperial(inch-lb)Grip range 50 – 250 2” – 10” Cup diameter 118 4.6 Net weight 3.9 9 Gross weight 4.4 10 Packaging dimension 420x230x250 16.5”x9”x9.8” د.إ1,350.00د.إ1,400.00Aardwolf Miter Clamp MC250
د.إ1,350.00د.إ1,400.00 -
Segmented Profiling Disc
Segmented Profiling Disc 30X20mmX50H Half Round for Granite
Price range: د.إ1,200.00 through د.إ1,350.00Segmented Profiling Disc
Price range: د.إ1,200.00 through د.إ1,350.00 -
Ceramic Profile 300mm Half Around
300/10mm Ceramic/Porcelain Tiles profile.
د.إ1,350.00د.إ1,400.00Ceramic Profile 300mm Half Around
د.إ1,350.00د.إ1,400.00 -
Segmented Profile 300mm Half Round
300/20mm profile segmented Half-round for Granite
Price range: د.إ1,200.00 through د.إ1,350.00Segmented Profile 300mm Half Round
Price range: د.إ1,200.00 through د.إ1,350.00 -
SUPER PRO 900
Super Professional tile cutter for diagonal and straight cuts on single-double fired ceramic and gres.
The carriage is equipped with nine ball-bearings, four of which are adjustable, to assure a perfect sliding and top precision.
Diagonal fence included.Carriage with nine ball-bearings.
Diagonal fence included.
– Cutting length up to 900 mm
– Size tile for diagonal cutting: 63 x 63 cmد.إ1,325.00د.إ1,500.00SUPER PRO 900
د.إ1,325.00د.إ1,500.00
Shop By Catagory
- Aardwolf-Frames
- Art Equipment
- Battipav
- Bush Hammering
- Electroplated Profiling
- Floor Polishing Machinery
- Forklift Equipment
- Grinding Tool
- Grooving Disc
- JIB Cranes
- Lifting & Clamp
- Montolit
- Polishing Powders & Wax
- Polishing Stones
- Polishing-Pads
- Power Tools & Machinery
- Automatic Polishing
- CNC Tools-woosuk
- Cutting Grinding & Shaping
- Floor Polishing
- General Chemical
- ILPA
- Kemistone
