-
ACQUASHIELD+White
ACQUASHIELD+ is a two-component mortar consisting of high resistance cements, fine aggregates with graded particle size (less than 0,3 mm), special additives (component A) and synthetic polymers in aqueous dispersion (component B). Easy to apply on both horizontal and vertical surfaces, it offers outstanding adhesion. The product is especially recommended to waterproof balconies, terraces and water tanks, and can also be used on old substrates whose aging is due to water, salts and frost; it protects also cement plasters, concrete manufactures, even in contact with ground, as well as cement screeds on terraces, balconies and swimming pools.
• EN 14891 CM• Waterproof and flexible levelling-off for cement based sub bases even with uneven surfaces
• Waterproof, flexible, skimming on cement-based plasters, even if cracked
• Waterproof coating of walls in contact with the ground, foundations and lift-shafts
• Waterproofing of baths, showers, balconies, terraces, and swimming pools before the ceramic tiles laying
• Waterproofing of water tanks
• Waterproof flexible coat on plaster-board • Protection and total waterproofing of screeds in terraces and balconies
• Waterproofing on pre-existing tile floors
• White version: used on the back of marble tiles as protection against superficial stainsد.إ135.00د.إ145.00 -
BENFERJOLLY
A two part white adhesive consisting of epoxy-polyurethane resins, graded particle size aggregates and special additives. It has been formulated and developed for rapid, reliable installation of almost all marble, granite, natural stone, marble agglomerate and tiles in composite marble with polyester resins or cements, including on non-absorbent substrates or substrates subject to slight dimensional variation. A special waterless composition makes this product especially suitable where there is a need to avoid the risk of irreparable staining, not least on porous varieties of marble, and prevent the possible deformation of reconstituted marble tiles. For interior and exterior application and for swimming pools.
• Floor and wall installation of marble, marble agglomerate and composite marble tiles, including low thickness tiles
• Interior floor and wall tiling exterior walls and floors in granite and natural stones, including on underfloor heating
• Tiling over existing internal ceramic or wood floors
• Tiling on steel substrates, which must first be sanded
• Tiling on gypsum and anhydrite substrates, without the preventative application of primerد.إ265.00د.إ270.00 -
DEKOGROUT
• Antibacterial and mould resistant
• Water repellent
• Resistant to freeze/thaw cycles
• Good application and wash-off properties
• Smooth surface and wide colour range (24 colours)
• For interior, exterior and under water
• Fulfils the requirements of EN 13888, CG2WA
• For joints from 1 – 6 mm wide
• Vapor permeable
• Suitable for heated floors and walls
• EC1: very low emission
• Colours matched to the DEKOSIL silicone systemDEKOGROUT is suitable for grouting glass mosaic, vitrified and fully vitrified clay tiles, brick tiles, tile slips, floor clinkers in bathrooms, showers and living rooms, on terraces, balconies and loggia. As well as facades, in swimming pools, commercial areas, and on heated and flow screeds. Furthermore DEKOGROUT is suitable for grouting of natural stones, if the product-specific properties of the natural stone material permit this and discolouration (i.e. through stones physical characteristics) can be eliminated. We recommend DEKOGROUT+ for the grouting of natural stones.
د.إ45.00د.إ48.00 -
BENFERGRIP+White
• Overlapping internal old floors
• Extra white
• High resistance to sliding
• Application without the need of spacers
• Perfect for glass and ceramic mosaics
• Perfect for Klinker and thick floor coverings
• Its smooth consistency reduces fatigue
• Long open time
• Tested in accordance with EN 12004, C2 TE
• Mixed with CEMLATEX 600 conforms to EN12004 C2 TE S2
• FLEXIBLE, deformability > 2 mmCertificate QB n° 151 MC 332This product improvable with CEMLATEX 600Hi-tech adhesive, extra-white, with no vertical sliding, frost-proof. Perfect for laying mosaic (glass, marble, porcelain), porcelain tiles and single-fired wall and floor tiles. Laying of thick floor coverings. High final resistances and extended open time.د.إ40.00د.إ43.00 -
BENFERFLEX C2 White
• High flexibility
• No vertical sliding
• Ideal for exterior application
• Ideal for heated screeds
• Ideal for porcelain stoneware
• Ideal for large sizes
• Application thicknesses up to 15 mm
• Tested in accordance with EN 12004, C2 TE S1Certificate QB n° 151 MC 157BENFERFLEX C2 is a thixotropic flexible adhesive consisting of high strength cements, graded particle size aggregates, synthetic resins and special additives. It has been formulated and developed for rapid, reliable installation of porcelain tile and ceramic tile on cement based screeds, non-absorbent substrates and onto substrates subject to slight dimensional variation. The high resistance to vertical sliding allows to tile from the top down.د.إ70.00د.إ75.00 -
Perla 0-8mm
Perla 0-8mm
Reinforced, cement-based, water-repellent and high strength tile grout- Unique color stability, unsurpassed mechanical strength.
- Bacteriostatic properties preventing the creation of bacteria.
- Resistant to dirt and easy to clean.
- Suitable for grouting ceramic tiles, ceramic granite, glass mosaic tiles and natural stone, for internal or external use on walls or floors.
- Quick filling of joints and very easy cleaning of residues.
- Classified as reinforced grout, waterproof and highly resistant to abrasion type CG2 WA in accordance with European standards EN 13888.
د.إ35.00د.إ38.00 -
Bauflex Fiber White
Bauflex Fiber
High-quality, fiber-reinforced polymer-modified cement-based tile adhesive- For high demands in adhesion and resistance to cracking, strong thermal expansion and contraction forces, frost and moisture.
- For fixing tiles and natural stones of all types and dimensions on walls and floors. Ideal for surfaces made of concrete, cement mortar, brickwork, render, under floor heating, swimming pools, etc.
- No vertical slip and extended open time for faster and more secure installations.
- OW DUST TECHNOLOGY that minimizes floating dust when mixing it with water before application.
- Classified as reinforced adhesive type C2TE S1.
CONSUMPTION: ≈ 1,5-4,0 kg/m²
د.إ60.00د.إ65.00 -
Ultra Acrylic
Ultra Acrylic
High-quality, polymer-modified cement-based tile adhesive- For fixing of all types of tiles, natural stones and large tiles on walls and floors.
- Ideal for surfaces made of concrete, cement mortar, brickwork, render, etc.
- Highly resistant to frost and humidity.
- No vertical slip and increased thixotropy during application.
- Extended open time for faster and more secure installations.
- Classified as reinforced adhesive type C2TE.
CONSUMPTION: ≈ 1,5-4,0 kg/m2
د.إ38.00د.إ40.00 -
Nanoline 900W
Nanoline 900W
Water and oil repellent, transparent nano impregnation surface waterproofing- Anti – carbonation coating.
- Absorbent or very low absorbent substrate protection.
- Water vapor permeability of walls and floors remains unaffected
- It does not produce a film on the surface and therefore does not change its original aesthetics.
- Suitable for marbles, granites, natural granite tiles, ceramic tiles, tile joints, natural or artificial stones, exposed concrete, plaster, cement mortars, bricks, etc.
- Chemical base: silane / siloxane aqueous dispersion.
- Maturation time: 5-10 hours.
CONSUMPTION: ≈ 0,05 – 0,1 kg/m²
Price range: د.إ225.00 through د.إ850.00 -
Nanoline 80W
Nanoline 80W
Water repellent, transparent nano impregnation surface waterproofing- Anti-carbonation coating.
- Water vapor permeability of walls and floors remains unaffected.
- It does not produce a film on the surface and therefore does not change its original aesthetics.
- For fair faced concrete, plaster, cement mortars, bricks, tiles, ceramics tiles, tile joints, natural or artificial stones, firebricks, etc.
- Chemical base: silane / siloxane aqueous dispersion.
- Maturation time: 5-10 hours.
CONSUMPTION: ≈ 0,2-0,3 kg/m²
Price range: د.إ200.00 through د.إ800.00 -
Aquasil Flex
Flexible, two- component brushable cement based sealing mortar
- For complete and permanent waterproofing of concrete, brickwork, plasters.
- Ability to bridge surface cracks.
- Ideal for waterproofing surfaces that show or are expected to show hairline cracks due to thermal contractions-expansions or vibrations like surfaces to be covered with tiles on balconies, terraces, pools and bathrooms, inverted roof insulation, walls and floors of basements, tanks, wells, canals, etc.
- Endures positive and negative hydrostatic pressure and the surface remains water vapor permeable.
- Suitable for contact with drinking water.
- Application thickness (2 coats): ≤ 5mm and ≥ 2mm
CONSUMPTION: 2-4 kg/m²
