- “Rockany Tile and Grout” already exists in your wishlist
-
DeterClean-AC
Hydrochlore-based acid cleaner
Features
Acid cleanser to clean stone and synthetic surfaces, laid down inside and outside.
Deterclean/AC acts efficiently on concrete residues, sealants and other materials used for laying.It totally removes saltpetre efflorescences without damaging the product. The product is excellent for all rough surfaces as well as for the basically colored materials, as the washing could result in loss of the dust effect, typical of the rough supports. In this way, according to the dilution and the contact times, the process could give a certain color charge. It is not suitable to clean surfaces with shiny or plumbed finishing.
The cleanser is suitable for all kinds of granite, for dark stones with non-shiny finishing and for materials such as Serizzo, Beola, Luserna, Klinker, gres, bricks and non-traditional cotto.
If properly diluted, the product does not leave any residual.
Deterclean/AC does not produce unpleasant smells or dangerous smokes. It can be diluted in water.
Note: the product is a formulation based on inhibited acids that do not interact with the supports on which they are used, but only on natural and artificial residuals that sediment on these surfaces by taking them totally away without damaging the structure of the support itself.Yeld
Its yield changes from 5 to 30 sq.m/lt.
According to the kind of cotto, finishing and the laying method.د.إ75.00د.إ85.00DeterClean-AC
د.إ75.00د.إ85.00 -
Levosil
Remove-silicone cleaner
Features
Levosil is composed of a mix of solvents with a very low evaporation to remove excesses of silicone, both cool and dry.
The product acts without ruining the base support by melting not only silicone but also most of the compounds that are in the glues, so it is better to make samples before intervening on the whole area. It is necessary to pay great attention to the glues that are used to fix hobs, or basins at the top.
Levosil does not damage the shiny surface and it can be used as strong degreaser without remains. It totally removes glue stains due to adhesive tape or to posters and light inks.
The product can be used to clean deeply before intervening with stain-removal protectors by avoiding dead times caused through the drying times of the supports in case of cleaning with waterbased cleansers. Levosil is a ready-to-use product.Yeld
As it is a cleanser and degreaser, it is not possible to calculate
its yield.د.إ140.00د.إ150.00Levosil
د.إ140.00د.إ150.00 -
Sabbiatore Dune
Aging effect solution for marbles and stains
Features
SABBIATORE is an acid-based formulation that allows to modify many marbles and stains aesthetically (both coloured and not), obtaining an aging effect; it is orange peel skin for ORANGE and DUNE, brushed effect for BALI and an aged finishing with furniture beetles for ANTIKO.
SABBIATORE forms a particular effect on the used materials as, kitchen countertops, floorings, staircases and coverings.
It is well applied on compact materials rich of calcium carbonate, as: Rosso Verona, Rosa Perlino, Trani,Travertino, Crema Marfil, Rosso Alicante.
Attention: shake the product before use.Yeld
From 3 to 5 sq.m/lt.
Packing:
1KG and 5 KG
Price range: د.إ75.00 through د.إ350.00Sabbiatore Dune
Price range: د.إ75.00 through د.إ350.00 -
Ristop
Anti-rising protector
Features
Ristop is a preparation created to prevent, while laying, rising of water and salts on floorings and coatings in marble, granite, quartzite, conglomerate and stones. The product must be applied on the inner side of the sheet and on all the sides directly in contact with the laying glues.
Ristop is compatible with any adhesive and therefore it does not compromise its glueing.
We recommend to make a test before proceeding on large surface areas.
This product solves the problem of spilling of stains, rings, efflorescences and oxidations caused by impurities in water because of the salt dissolution that are both in stone materials and in the glues used while laying, through the rising water, these come to the surface and stain it.
Ristop is a transparent, odorless product, and its use is particularly suitable for white marbles and applying on external floorings that are oftener subject to the above-mentioned problems.Yeld
Its yield is rather variable in consideration of the types of supports on which it can be applied.
We indicate a yield of 1 liter of product for a surface of 8/10 sq.m, and it can be 1 liter of product for 10/20
sq.m for very compact materials.Packing:
1KG and 5 KG
Price range: د.إ125.00 through د.إ600.00Ristop
Price range: د.إ125.00 through د.إ600.00 -
Stopsal Carbo
Anti rising product for cotto, stones, concrete
Features
Stopsal Carbo/Sil is a protective primer with water-oil repellent function, studied to protect surfaces in cotto, exposed concrete and stone materials with limestone composition like the stones of Egyptian origin that have high concentrations of salts and show little surface breakpoints with gloss loss. Using Stopsal allows to remove or to limit the rising of salts on both inner and outer floorings, stairs or coatings.
Using Stopsal as a base protector limits considerably the consumption of a stain removal product by reducing applying and drying times. It does not change the natural color of the treated stones and it is invisible. It .does not turn yellow over time.Yeld
It is not easy to calculate its yield, as the product must be applied in more coats, wet on wet, until the stone
absorbs itPacking:
1KG and 5 KG
Price range: د.إ175.00 through د.إ800.00Stopsal Carbo
Price range: د.إ175.00 through د.إ800.00 -
Kemiwet 6040
Revitalizing, toning product
Features
Toning protective product with impregnating effect, it forms a lattice with the molecules of the treated support, giving marbles and granites a wet effect without forming a plastic effect on the support, and giving, on the contrary, a very natural aspect by highlighting the color effects of the support.
Kemiwet is suitable both for inner and outer surfaces. Particularly suitable on smoothed, sanblasted, brushed, flamed, bush-hammered surfaces and on all stone surfaces, where the finishings have weakened the color.
Kemiwet is a stain-removal product, but it is better to apply a light coat of Mekoil/Royal to stress its peculiarity.
30 minutes later, remove the excess with white felt.Yeld
Its yield changes according to the kind of material and finishing from 6 to 30 sq.m/lt of product for two coats.
Approximate yield according to the kind of production:
Smoothed 15-20 sq.m/lt
Brushed 25-30 sq.m/lt
Tumbled 10-15 sq.m/lt
Bush hammered 8- 10 sq.m/lt
Flamed 6-10 sq.m/lt
Disc cutting and sandblasted 8-10 sq.m/lt
Quarry gap 6-8 sq.m/ltد.إ150.00د.إ160.00Kemiwet 6040
د.إ150.00د.إ160.00 -
Jackstone
Anti stain, anti-rising product in solvent base
FeaturesJackstone is a product studied to give outstanding water-oil repellent features to the materials treated.
Particularly used to protect countertops, floorings, and coatings in marble and granite.
It does not change the features of the surface or the colors of the materials treated, even if we always recommend making a test sample.
Jackstone in solution appears amber, invisible by applying, and resistant to UV-rays. It does not turn yellow over time and its protective action is long-lasting.Yeld
From 20 to 25 sq.m/lt.
According to the porosity of the material to be treated on a shiny surface.
د.إ150.00د.إ175.00Jackstone
د.إ150.00د.إ175.00 -
Vivo
VIVO is a solvent-based product designed and studied to enhance the color of the stone. The product gives a persistent “wet effect” and shine on all untreated stone surfaces. Protects and enhances the original color of natural, polished, rough and antiqued stones. The peculiarity is its deep penetration of the material protecting it from stains and watery and oily dirt. It is ideal for window sills, rosettes, decorations etc … It does not yellow over time and is resistant to UV rays with lasting protection. It has a very high yield, not creating any surface film.
د.إ120.00د.إ130.00Vivo
د.إ120.00د.إ130.00 -
-
DRAI Water Based
Water-based DRAI is a water-based waterproofing agent and a protective agent that combines excellent water repellency with good oil repellency. It can be applied by spray, brush and roller.
د.إ65.00د.إ75.00DRAI Water Based
د.إ65.00د.إ75.00 -
Blu Mastic
Two-component mastic based on high-boiling acrylic and methacrylic solvents and quick drying unsaturated polyester resins. The BLUE mastic WITHOUT STYRENE, formulated with a minimum content of solvents, has no risk indications and does not involve health risks, while maintaining the same proven effectiveness of the mastics produced by ILPA. Excellent for all gluing works of marble and granite slabs, it has characteristics of extraordinary adhesion on both marble and granite. BLU MASTICE WITHOUT STYRENE is available both TIXO and LIQUID, to satisfy all processing needs.
د.إ45.00د.إ55.00Blu Mastic
د.إ45.00د.إ55.00
