-
Stopsal Carbo
Anti rising product for cotto, stones, concrete
Features
Stopsal Carbo/Sil is a protective primer with water-oil repellent function, studied to protect surfaces in cotto, exposed concrete and stone materials with limestone composition like the stones of Egyptian origin that have high concentrations of salts and show little surface breakpoints with gloss loss. Using Stopsal allows to remove or to limit the rising of salts on both inner and outer floorings, stairs or coatings.
Using Stopsal as a base protector limits considerably the consumption of a stain removal product by reducing applying and drying times. It does not change the natural color of the treated stones and it is invisible. It .does not turn yellow over time.Yeld
It is not easy to calculate its yield, as the product must be applied in more coats, wet on wet, until the stone
absorbs itPacking:
1KG and 5 KG
Price range: د.إ175.00 through د.إ800.00Stopsal Carbo
Price range: د.إ175.00 through د.إ800.00 -
Smacoxy
It removes organic and rising stains
Features
Smacoxy is a water-based formulation of oxidizing agents and suitable additives, recommended to remove organic stains (coffee, tea, nicotine, sawdust, urine, leaves, etc.).
The product acts on stains on tables, countertops, bar tops, floorings in marble, granite, stone and quartzites and also on rings caused by rising or on laying stains, even if it is better to dilate the material through special cleaning agents of alkaline origin (BASICUM) or of acid origin (DETERCLEAN AC/AF).
It does not damage in any way shiny surfaces.
We suggest removing the product within 4 hours from its application.
One single coat allows removing the most recent stains.
As for older and deeper rings, more applications are needed. The result of the stain removal will be clear after several hours, that is when the support is totally dry. It is better to space the different applications waiting a few hours from each other.Yeld
It is not possible to calculate the consumption of the product per sq.m in presence of different kinds of supports, finishings and smudging substances.
د.إ175.00د.إ185.00Smacoxy
د.إ175.00د.إ185.00 -
Stopsal Sil
Anti rising product for cotto, stones, concrete
Features
Stopsal Sil is a protective primer with water-oil repellent function, studied to protect surfaces in cotto, exposed concrete and stone materials with limestone composition like the stones of Egyptian origin that have high concentrations of salts and show little surface breakpoints with gloss loss. Using Stopsal al-lows to remove or to limit the rising of salts on both inner and outer floorings, stairs or coatings.
Using Stopsal as a base protector limits considerably the consumption of a stain removal product by reduc-ing applying and drying times. It does not change the natural color of the treated stones and it is invisible. It does not turn yellow over time
Yeld
It is not easy to calculate its yield, as the product must be applied in more coats, wet on wet, until the stone absorbs it.Packing:
1KG and 5 KG
Price range: د.إ175.00 through د.إ800.00Stopsal Sil
Price range: د.إ175.00 through د.إ800.00 -
Blackuet
Black corrector
Features
Black coloured primer, protector, that can create a lattice with the molecules of the treated support giving an homogeneous black colour. You get a particularly positive result on the brinks of the black granites that had been previously treated with All Black. The effect you get is very natural.
Blackuet is suitable for inner and outer surfaces, smoothed, sandblasted, flamed, brushed, bush hammered and for all the materials on which the processings have weakened the colors.
Blackuet is not stain-removal, therefore it is better to apply a light coat of JACKSOTNE and 30 minutes later to remove the excess (with a white felt).د.إ175.00د.إ185.00Blackuet
د.إ175.00د.إ185.00 -
Carborust
FEATURES
CARBORUST is a fluid gel that is used for the elimination of contact rust on stones and marbles with a composition based on calcium carbonate where normal acid formulations can cause burns on the surface.
This product eliminates oxidation without ruining the surfaces and maintaining the graphic characteristics of the surface subject to stain removal.Yield
The yield of the material is purely theoretical
د.إ175.00د.إ185.00Carborust
د.إ175.00د.إ185.00 -
Super Binder 211
Protecting agent against the climbing up of the humidity and for improving the adhesion capacity.
For:
Protection against the climbing up of the humidity • Improvement of the adhesion • Specially suitable for laying, marble, granite, natural stones, gres porcelain tiles and big size tiles both indoor and outdoor
Main properties:
Bars the upward humidity and the climbing up of stains from the background • Easy to use •Promoter of adhesion
How to use: Apply by paint-brush the undiluted product to the back side of the tiles and lay immediately. Apply the tiles before the product dries. Request the Technical Data Sheet.
Technical data: Micronized anionic emulsion of copolymer. Average consumption: 100-150 gr./sqm. Application temperature between + 5°C and + 35°C (41°F and 95°F).
Packaging: 5Lد.إ175.00د.إ200.00Super Binder 211
د.إ175.00د.إ200.00 -
Epoxy Glass
Epoxy adhesive, bi-component, colourless, thixo vertical/solid of high performances.
Without added solvents.
For stuccoing, repairing and gluing of:
Granite • Marble • Ceramics • Metals • Wood • Natural stones
(between them or with heterogeneous supports)
Main properties:
Permanent bonding also in very difficult situations • Bonding of different materials Very high grip • Good elasticity • Negligible shrinkage • High workability • Fine granulometry
How to use: Apply on clean and dry materials. Mixing ratio component A and component B = 100:50. Application temperature between +10°C and +30°C (50°F and 86°F). Request the Technical data: Mixing time: 3 to 5 minutes.
Application time: 20 minutes.
Hardening time: 3 to 5 hours. Handling of the bonded pieces: after 8 to 10 hours. Complete curing after 24 hours. Shrinkage: 0,3%. Stability: 12 months into the original sealed containers at temperature of 15°C-25°C (59°F-77°F).
Packaging: 1.5Lد.إ175.00د.إ180.00Epoxy Glass
د.إ175.00د.إ180.00 -
KD18 115mm Angle Grinder
Product Description
115MM angle grinder with a classic design. A very mature model with a mature performance. Long life span with strong power. Designed & Manufactured by KYNKO Power Tools, Quality Guaranteed.Specification
Model: S1M-KD18-115 VOLTAGE: 110V~/220V~ FREQUENCY: 50Hz/60Hz INPUT POWER: 750W MAX WHEEL DIAMETER: 115MM NO LOAD SPEED: 11000RPM N.W.: 1.7KG Features
1. The enamelled wire of the stator is protected by insulating glue to improve insulativity.
2. Advanced manufacturing technology of motor, 750W strong power.
3. Using the patented coating technology to extend the motor life.
4. Increase rotor power to improve work efficiency by 30%.
5. Housing is made of imported material, heat-resistant, no crack, no deformation
6. Runs smoothly at high speed, no vibrating to hand.
7. 20CrMnTi gear to reduce noise and increase life span
8. Application: tile, slate cutting. Long life span, design for heavy duty.Packing details
QTY/CTN: 8pcs/ctn(color box)
Packing Size: 60*32*25cmد.إ175.00د.إ190.00KD18 115mm Angle Grinder
د.إ175.00د.إ190.00 -
KD19 115mm Angle Grinder
Product Description
115MM angle grinder with a slim body and new technology. Side switch item. More convenient for operation. Designed & Manufactured by KYNKO Power Tools, Quality Guaranteed.
SpecificationModel: S1M-KD69-115 VOLTAGE: 110V~/220V~ FREQUENCY: 50Hz/60Hz INPUT POWER: 900W MAX WHEEL DIAMETER: 115MM NO LOAD SPEED: 11000RPM N.W.: 1.6KG Features
1. 360 degree cooling system, effectively control the temperature rise.
2. Advanced manufacturing technology of motor, 900W strong power.
3. Using the patented coating technology to extend the motor life.
4. Side switch, easy operation.
5. Easy assembling & disassembling design of dustproof insert, effectively protect the motor from dust.
6. Ergonomics design, Slim body, easy to grasp, flexible operation.
7. Runs smoothly at high speed, no vibrating to hand.
8. 20CrMnTi gear to reduce noise and increase life span
9. Application: tile, slate cutting. Long life span, design for heavy duty.Packing details
QTY/CTN: 8pcs/ctn(color box)
Packing Size: 60*32*25cmد.إ175.00د.إ190.00KD19 115mm Angle Grinder
د.إ175.00د.إ190.00 -
Lamination Rail Clamp
Lamination Rail Clamp 10 Inch CTTBC10
Lamination Rail Clamp 2′ (610mm) CTTBC2
Lamination Rail Clamp 3′ (915mm) CTTBC3
Lamination Rail Clamp 4′ (1220mm) CTTBC4
Lamination Rail Clamp 6′ (1830mm) CTTBC6General
The Lamination Rail Clamp has a unique purpose and function in the marble and granite workshops. Designed for laminating edge strips, the Lamination Rail Clamp cut clamping time by 75% or more, increase production and improve the quality of joints. The Lamination Rail Clamp is now an indispensable tool for the professional fabricator. Fabricators who have used the Lamination Rail Clamp never want to go back to the days of C-clamps again.
Features
- The longer length bar clamps include a spring-loaded holding jaw, which keeps the clamp in place during alignment of edge strips
- Clamp threads are concealed, protecting them from epoxy contamination
- Large, easy-grasp tightening handles
- Made from extruded anodized aluminum, stainless steel, and zinc-plated steel
Price range: د.إ175.00 through د.إ950.00Lamination Rail Clamp
Price range: د.إ175.00 through د.إ950.00 -
Premium Edge Polishing Disk-For straight edge
The new premium Edge polishing disk has higher quality polishing results and a longer lifetime than the standard edge polishing disk. It provides fast polishing performance and professional quality finish every time. It makes very good polishing results on Granite, Engineered Stone, and Marble.
20% better polishing and 30% increased lifetime than standard disk
د.إ175.00د.إ200.00Premium Edge Polishing Disk-For straight edge
د.إ175.00د.إ200.00 -
Chamfering Disk
Resin bonded disk designed for chamfering stone and ceramic materials.
This high quality diamonds contained disk provides an excellent chamfering result.- CHFRD-100 : 5″ RESIN CHAMFERING DISK #100
- CHFRD-200 : 5″ RESIN CHAMFERING DISK #200
- CHFRD-400 : 5″ RESIN CHAMFERING DISK #400
- CHFRD-800 : 5″ RESIN CHAMFERING DISK #800
د.إ175.00د.إ200.00Chamfering Disk
د.إ175.00د.إ200.00
Shop By Catagory
- Aardwolf-Frames
- Art Equipment
- Battipav
- Bush Hammering
- Electroplated Profiling
- Floor Polishing Machinery
- Forklift Equipment
- Grinding Tool
- Grooving Disc
- JIB Cranes
- Lifting & Clamp
- Montolit
- Polishing Powders & Wax
- Polishing Stones
- Polishing-Pads
- Power Tools & Machinery
- Automatic Polishing
- CNC Tools-woosuk
- Cutting Grinding & Shaping
- Floor Polishing
- General Chemical
- ILPA
- Kemistone











