- “Nicolai 60 Series Profile H2060 POS1 G1” already exists in your wishlist
-
Forklift Boom FB2-3580 / 5380
General
The Forklift Booms are made from high-grade Australian rectangular tube steel, AS1163-450 LO, which ensures strength, reliability, and safety. The Forklift Booms complement the patented range of Aardwolf lifting clamps. The FB2-3580 is a telescoping two section rectangular tube steel boom for use on 3-tonne forklift trucks and larger. It offers versatility with maximum visibility for the driver.Features
- The boom extension is designed so it cannot be pulled all the way out
- The boom is firmly secured onto fork blades by two bolts located at the back of each fork pocket and restraint pins
Note: Boom lift capacities depends completely on the capacity of the forklift being used.
Specifications
Metric(mm-kg)Imperial(inch-lb)Slip onto forks designed with fork pockets 165×65 6.5”x2.6” Fork pockets from the center to center 377 14.8” Manually telescopes 2107 – 3580 83”x141” Increment 491 19.3” Working load limit Retracted:1500
Extended:6003307
1322Net weight 136 300 Gross weight 146 322 Packaging dimension 2250x630x550 88.6”x24.8”x21.7” Price range: د.إ4,300.00 through د.إ5,300.00Forklift Boom FB2-3580 / 5380
Price range: د.إ4,300.00 through د.إ5,300.00 -
Dia-Abrax
Finish
> sandblasting 800 grain size
> sandblasting 400 grain sizeProcessing type
> on flat surfacesMaterial
> Granite/SandstoneDia-Abrax is a tool for sandblasting finish grain size 800, 400 on granite and sandstone.
Dia-Abrax is a patented tool which has rollers with an application of different sizes of grit depending on the desired finish, in order to make a perfect sandblasting effect. It has also the system of the glide which allows a uniform finish over the whole slab surface, even near the edges.APPLICATION
Tool must be fixed on the hold plate of the polishing machine and work as a normal polishing tool.
PERFORMANCE
√ Easy installation and use.
√ Opportunity to work on naturally punched materials.
√ Opportunity to work on thin or defective slabs.
√ Uniform finish over the whole slab surface.
√ High production with minimum investment.د.إ5,120.00د.إ5,200.00Dia-Abrax
د.إ5,120.00د.إ5,200.00 -
Transport Truck AHTC-750/1500
General
Four-wheel truck with tilting platform. Steering by means of a ball-type turntable. Tilting claws, parking brake on the tow-bar. When changing from a vertical to the horizontal position, the wooden bearing surface is automatically locked.Price range: د.إ4,200.00 through د.إ5,000.00Transport Truck AHTC-750/1500
Price range: د.إ4,200.00 through د.إ5,000.00 -
Cicala
Base-frame in painted aluminium; plastic water tank. Steps Polisher has been conceived to solve the problem of polishing steps and landings as quickly and easily as possible. Small sizes and excellent manageability are its main features.
Accessories
Base-plate
Splash-guard
Set of servicing wrenchesOptionals
Fixed trolley with honing head Ø 260 mm.
Polishing tools
Abrasive stonesTechnical Data
Item: 100350
MOD: CICALA
MM: 190
kW-Volt: 1.5 – 230
Lt: 5,9
cm (L-B-H): 56X32X77
Kg: 40The technical data herein mentioned are non-binding. They are for your guidance, only.
د.إ5,000.00د.إ5,250.00Cicala
د.إ5,000.00د.إ5,250.00 -
Linda With Tank
The monobrush Linda is suitable for surfacing and cleaning floors made from ceramic or cotto tiles, marble and natural stone for the construction industry.
A full range of accessories to meet all needs.– SINGLE-PHASE 230V~50Hz
– Polypropylene brush Ø 420 mm. Art. 099Two rotation speeds
- Power Engine : 0,9Hp / 0,65Kw
- Machine Dimension in Stock : 57X43X44 cm
- Tank Capacity : 8 lt
- Rotation Speed : 60 rpm
- Speed Selector ii^ Gear: 120 rpm
- Engine Type: Single – Phase 230V-50Hz
د.إ4,950.00د.إ5,000.00Linda With Tank
د.إ4,950.00د.إ5,000.00 -
Varia
Finishes
> Coarse bushammering
> Medium bushammering
> Fine BushammeringProcessing type
> On flat surfacesMaterial
> Marble/LimestoneThe rotary bush hammering tools Varia are made for coarse, medium, and fine bush hammering finishes on marble and limestone. Varia is a patented tool that uses the system of the glide to obtain 3 different bush hammering finishes with the same tool. This system allows a perfect uniform finish over the whole slab surface, even close to the edges as it protects them from chipping.
APPLICATION
Once set the tool to the desired finish, must then be fixed on the hold plate of the polishing machine and work as a normal polishing tool.
PERFORMANCE
√ Easy installation and use.
√ Opportunity to work on thin or defective slabs.
√ Uniform finish over the whole slab surface.
√ High production with minimum investment.د.إ4,650.00د.إ4,700.00Varia
د.إ4,650.00د.إ4,700.00 -
Drago
Finish
> Combed grain size 1400
> Combed grain size 800
> Combed grain size 400
> Rolling grain size 2000
> Rolling grain size 1400
> Rolling grain size 800
> Rolling grain size 400Processing type
> on flat surfacesMaterial
> Marble/Limestone
> Granite/SandstoneDrago is a tool for the bridge saw machine for the rolling finish on marble, stone, and granite.
Drago can hold Lupato Rollex and Dia-Rollex with any grain size and automatically reproduces the manual finish setting the right ratio between rotation and forward speed.APPLICATION
Drago can be fixed on every kind of bridge saw machine or banner tile cutters which has the RPM regulator.
PERFORMANCE
√ Drago accurately reproduces the manual finish.
√ It can process automatically without the operator.
√ Easy to use.
√ Work in totally safety because the tool is always covered by the protection.Tool for Rolling Finish |(LM)
د.إ4,400.00د.إ4,500.00Drago
د.إ4,400.00د.إ4,500.00 -
Givre
Finish
> medium commaProcessing type
> on flat surfacesMaterial
> Marble/LimestonGivre is a tool for medium comma finish on marble and limestone.
The disposition of the rollers and their special insert give medium Comma finish.APPLICATION
The tool must be fixed on the holding plate of the polishing machine and work as a normal polishing tool.
PERFORMANCE
√ Easy installation and use.
√ Opportunity to work on thin or defective slabs.
√ Uniform finish over the whole slab surface.
√ High production with minimum investment.د.إ4,300.00د.إ4,500.00Givre
د.إ4,300.00د.إ4,500.00 -
MOTO FLASH LINE 2 – MOTORIZED DRY CUTTING SYSTEM
With the birth of MOTO-FLASHLINE 2 the motorized version of the Flash-Line (manual cutting system) evolves and improve itself.
In this new proposal there are updates and technical improvements on the anchoring system between the engine and the trolley-guide and on the suction system (now an integral part of the machine) which, thanks to automatic adjustments guarantees absence of dust and optimal cooling.
The machine combines the advantages of the manual Flash line ( lightness, precision and, above all, the patented anti-slip locking system) with the addition of a motorized head combined with a professional diamond blade for ceramic included.
MOTO-FLASH 2 represents the “NO LIMITS” solution for dry cutting on ceramic, porcelain, marble and granite with lengths up to over three meters (340 cm) and thicknesses up to 20 mm.
د.إ4,000.00د.إ4,100.00MOTO FLASH LINE 2 – MOTORIZED DRY CUTTING SYSTEM
د.إ4,000.00د.إ4,100.00 -
Birba
Finish
> Scratching step 5 mm
> Scratching step 2,5 mm
> Combed
> Rolling grain size 2000
> Rolling grain size 1400
> Rolling grain size 800
> Rolling grain size 400
> In line bushammered antiskid
> GroovingProcessing type
> on flat surfaces
> antiskidMaterial
> Marble/Limestone
> Granite/SandstoneBirba is an electric tool holder machine to make antiskids and finishes on flat surfaces of marble, stone and granite. Birba tools are divided into short for antiskids and long for finishes on flat surfaces.
Birba is a machine specifically designed for antiskids. It has an innovative guide group which allows very precise adjustments even if it keeps small size to work on stairs already laid.PERFORMANCE
√ Machine in compliance with CE standards.
√ Wide range of tools for many finishes.
√ It has a connector for the suction pipeد.إ3,950.00د.إ4,000.00Birba
د.إ3,950.00د.إ4,000.00 -
Dia-Rollex
Finish
> rolling 2000 grain size
> rolling 800 grain size
> rolling 400 grain sizeProcessing type
> on flat surfaces
> edgesMaterial
> Granite/SandstoneDia-Rollex is a tool for the rolling finish of granite and sandstone.
Dia-Rollex is made with an application of brazed grit of different sizes depending on the desired finish, in order to make a perfect rolling effect.
The inserts of the Dia-Roker for the grinder are designed to have a long life as they can be used in all its vertices by rotating them, thus multiplying the tool life.APPLICATION
Dia-Rollex ø115 and Dia-Roker ø115 with the protection cover can be applied to the grinder Bosch GPO 14 CE while Dia-Rollex ø80 can be applied to the mini grinder. They can also be applied to different grinders, but only on specific request. It is compatible with M14 or 5/8” attachment depending on the grinder on which it is applied.
PERFORMANCE
√ Easy to use.
√ Opportunity to work on thin or defective slabs.
√ Work is totally safe because the tool is always covered by the protectionد.إ3,900.00د.إ4,000.00Dia-Rollex
د.إ3,900.00د.إ4,000.00 -
Aardwolf Slab Lifter Black
General
The patented Aardwolf Slab Lifter is an accessory for lifting and moving slab-form loads. The Aardwolf Slab Lifter incorporates a spring-loaded latch that automatically releases the lifter from the slab once the slab has been fully lowered to the ground. This makes the process of lifting and lowering of slabs a one-man operation.Features
- Size: Being of a compact construction, the Aardwolf Slab Lifter allows for close packed stone slabs to be lifted out of racks and containers. Lower height slabs placed along side of taller slabs offer no problem, as is the case with scissor clamps.
- Versatile: Ideal for construction work. Because the clamping mechanism is to the front of the slab, they allow panels to be placed close against walls.
- Safety: Requires only a small movement of the slab to engage and grip the slab, which is generally well below the over balance angle thus eliminating the danger to the operator.
- Secure: The Aardwolf clamps grip marble and granite slabs firmly. The Aardwolf Slab Lifter has a force-multiplying factor of approximately 2.5 to 1.
Specifications for AL30
Metric(mm-kg)Imperial(inch-lb)Grip range 0 – 30 mm Working load limit 1200 2646 Price range: د.إ2,200.00 through د.إ3,850.00Aardwolf Slab Lifter Black
Price range: د.إ2,200.00 through د.إ3,850.00
