Epoxy-polyester adhesive, fluid, semisolid. Colours: straw/beige, white, black, grey, red, travertine or other colours on demand. Can be coloured with General’s special colour paste “Base Colore”. Special colours on demand and according to the quantity.
For bonding and repairing of:
Granites • Marbles • Natural stones • Engineered stones • Agglomerates and terrazzo tiles • Cement • Iron
Main properties:
Permanent bonding also in difficult situations of stone materials and of not homogeneous materials (stone, cement, iron).
Very high seal • Fast grip • Minimum shrinkage • High workability
How to use: Apply on dry and clean materials. Hardening through paste catalyst (2-3%).
The hardened adhesive is workable after 2-5 hours. Request the Technical Data Sheet.
Technical data: Viscosity: Fluid 30000-60000 cPs. Viscosity: Semisolid 200000-250000 cPs.
Mixing time: 1 minute. Application time: 1 to 4 minutes.
Hardening time: 4 to 6 minutes at 30°C/86°F, 7 to 12 minutes at 20°C/68°F, 15 to 20 minutes at 10°C/50°F. Use temperature after hardening: min. 0°C/32°F – max. 100°C/212°F.
Stability: 6 months into the original sealed containers at temperature of 15°C-25°C (59°F-77°F).
Packaging: 1L

REDUCES SLIPPERINESS ON WET SURFACES, FOR CERAMIC, PORCELAIN AND NATURAL STONES
Water Based product of corrosive nature to reduce the slipperness of the floors. Application makes the surface micro erosion that allows an easier “discharge” of the water between the wet surface and the sole of the shoes. The result obtained is definitive. Applicable for the indoor and outdoor application. Before application it should be aware that no foreign substances should present on the surface. It should be completely clean and dry, free from wax residues.

Packing: 1L