- “Ceramic Profile 300mm Half Around” already exists in your wishlist
-
Drago
Finish
> Combed grain size 1400
> Combed grain size 800
> Combed grain size 400
> Rolling grain size 2000
> Rolling grain size 1400
> Rolling grain size 800
> Rolling grain size 400Processing type
> on flat surfacesMaterial
> Marble/Limestone
> Granite/SandstoneDrago is a tool for the bridge saw machine for the rolling finish on marble, stone, and granite.
Drago can hold Lupato Rollex and Dia-Rollex with any grain size and automatically reproduces the manual finish setting the right ratio between rotation and forward speed.APPLICATION
Drago can be fixed on every kind of bridge saw machine or banner tile cutters which has the RPM regulator.
PERFORMANCE
√ Drago accurately reproduces the manual finish.
√ It can process automatically without the operator.
√ Easy to use.
√ Work in totally safety because the tool is always covered by the protection.Tool for Rolling Finish |(LM)
د.إ4,400.00د.إ4,500.00Drago
د.إ4,400.00د.إ4,500.00 -
Dia-Roker
Finitura
> Graffiatura passo 5 mm
> Graffiatura passo 2,5 mmTipologia
> sul piano
> antiscivoloMateriale
> Graniti/arenariaI Dia-roker sono utensili per la graffiatura passo 5 mm e 2,5 mm su pietre e graniti.
I Dia-Roker montano degli inserti rimovibili per permettere di variarne la posizione e la quantità. Così facendo si regola il tipo e la larghezza della finitura. Gi inserti sono inoltre progettati per avere una lunga durata, in quanto capovolgendo gli inserti si possono utilizzare tutti i suoi vertici, moltiplicando così la vita dell’utensile.APPLICAZIONE
I Dia-Roker possono essere applicati a tutte le frese a ponte o a bandiera con albero orizzontale.
PERFORMANCE
√ Estrema facilità di montaggio e d’uso.
√ Possibilità di lavorare lastre sottili o difettose.
√ Graffiatura perfettamente uniforme su tutta la superficie.
√ Diversi tipi di graffiature con un solo utensile.
√ Alte produzioni con minimo investimento.Available: 300×100
د.إ7,500.00د.إ7,600.00Dia-Roker
د.إ7,500.00د.إ7,600.00 -
Roker
Finish
> scratching step 5 mm
> scratching step 2,5 mmProcessing type
> on flat surfaces
> antiskidMaterial
> Marble/LimestoneRokers are tools for scratchig finish step 5 mm and 2,5 mm on marble and stones.
Rokers have removable inserts in order to vary their position and quantity. In this way it is possible to adjust the type and width of finish. Inserts are also designed to have a long life as they can be used in all its vertices by rotating them, thus multiplying the tool life.APPLICATION
Rokers can be fixed on every kind of bridge cutters or banner tile cutters with horizontal shaft.
PERFORMANCE
√ Easy installation and use.
√ Opportunity to work on thin or defective slabs.
√ Uniform finish over the whole slab surface.
√ Different kind of Scratching finish with only one tool.
√ High production with minimum investment.Price range: د.إ4,100.00 through د.إ8,100.00Roker
Price range: د.إ4,100.00 through د.إ8,100.00 -
Dia-Abrax
Finish
> sandblasting 800 grain size
> sandblasting 400 grain sizeProcessing type
> on flat surfacesMaterial
> Granite/SandstoneDia-Abrax is a tool for sandblasting finish grain size 800, 400 on granite and sandstone.
Dia-Abrax is a patented tool which has rollers with an application of different sizes of grit depending on the desired finish, in order to make a perfect sandblasting effect. It has also the system of the glide which allows a uniform finish over the whole slab surface, even near the edges.APPLICATION
Tool must be fixed on the hold plate of the polishing machine and work as a normal polishing tool.
PERFORMANCE
√ Easy installation and use.
√ Opportunity to work on naturally punched materials.
√ Opportunity to work on thin or defective slabs.
√ Uniform finish over the whole slab surface.
√ High production with minimum investment.د.إ5,120.00د.إ5,200.00Dia-Abrax
د.إ5,120.00د.إ5,200.00 -
Hammer
Finish
> medium bushammering
> fine bushammeringProcessing type
> on flat surfacesMaterial
> Granite/SandstoneHammer tools are made for medium and fine bushammering finish on granite.
Hammer is a tool with a structure designed to work on hard and abrasive materials. The compensation system of the rollers and their disposition give very high productivity and production rates.APPLICATION
Once set the tool to the desired finish, must then be fixed on the hold plate of the polishing machine and work as a normal polishing tool.
PERFORMANCE
√ Easy installation and use.
√ Opportunity to work on thin or defective slabs.
√ Uniform finish over the whole slab surface.
√ High production with minimum investment.د.إ6,650.00د.إ6,700.00Hammer
د.إ6,650.00د.إ6,700.00 -
Abrax
Finishes
> Sandblasting grain 1400
> Sandblasting grain 800
> Sandblasting grain 400Processing type
>On flat surfacesMaterial
> Marble/LimestoneAbrax is a tool for sandblasting finish grain size 1.400, 800, 400 on marble and limestone.
Abrax is a patented tool which has rollers with an application of tungsten carbide grit of different sizes depending on the desired finish, in order to make a perfect sandblasting effect. It has also the system of the glide which allows a uniform finish over the whole slab surface, even near the edges.APPLICATION
The tool must be fixed on the holding plate of the polishing machine and work as a normal polishing tool.
PERFORMANCE
√ Easy installation and use.
√ Opportunity to work on naturally punched materials.
√ Opportunity to work on thin or defective slabs.
√ Uniform finish over the whole slab surface.
√ High production with minimum investment.د.إ3,470.00د.إ3,500.00Abrax
د.إ3,470.00د.إ3,500.00 -
Varia
Finishes
> Coarse bushammering
> Medium bushammering
> Fine BushammeringProcessing type
> On flat surfacesMaterial
> Marble/LimestoneThe rotary bush hammering tools Varia are made for coarse, medium, and fine bush hammering finishes on marble and limestone. Varia is a patented tool that uses the system of the glide to obtain 3 different bush hammering finishes with the same tool. This system allows a perfect uniform finish over the whole slab surface, even close to the edges as it protects them from chipping.
APPLICATION
Once set the tool to the desired finish, must then be fixed on the hold plate of the polishing machine and work as a normal polishing tool.
PERFORMANCE
√ Easy installation and use.
√ Opportunity to work on thin or defective slabs.
√ Uniform finish over the whole slab surface.
√ High production with minimum investment.د.إ4,650.00د.إ4,700.00Varia
د.إ4,650.00د.إ4,700.00 -
Spunty
Finish
> coarse nicking
> fine nickingProcessing type
> on flat surfacesMaterial
> Marble/Limestone
> Granite/SandstoneSpunty tools are tools for nicking finish on marble, limestone, granite and sandstone.
The special bits give Nicking finish.APPLICATION
tool must be fixed on the hold plate of the polishing machine and work as a normal polishing tool.
PERFORMANCE
√ Easy installation and use.
√ Uniform finish over the whole slab surface.
√ High production with minimum investment.د.إ3,200.00د.إ3,250.00Spunty
د.إ3,200.00د.إ3,250.00 -
Givre
Finish
> medium commaProcessing type
> on flat surfacesMaterial
> Marble/LimestonGivre is a tool for medium comma finish on marble and limestone.
The disposition of the rollers and their special insert give medium Comma finish.APPLICATION
The tool must be fixed on the holding plate of the polishing machine and work as a normal polishing tool.
PERFORMANCE
√ Easy installation and use.
√ Opportunity to work on thin or defective slabs.
√ Uniform finish over the whole slab surface.
√ High production with minimum investment.د.إ4,300.00د.إ4,500.00Givre
د.إ4,300.00د.إ4,500.00 -
Kinki
Finish
> coarse commaProcessing type
> on flat surfacesMaterial
> Marble/LimestoneKinki is a tool for coarse comma finish on marble and limestone. Kinki can be fixed on manual polishing machines to work on slabs and tiles, to work on floors already laid it can be fixed also on floor polishing machines.
The rollers with a special disposition of the bit give a Coarse Comma finish.APPLICATION
The tool must be fixed on the holding plate of the polishing machine and work as a normal polishing tool.
PERFORMANCE
√ Easy installation and use.
√ Uniform finish over the whole slab surface.
√ High production and new finishes with minimum investment.د.إ3,200.00د.إ3,300.00Kinki
د.إ3,200.00د.إ3,300.00 -
T7 21″ Electric Grinder
The ASL T7 is a 21-inch floor grinding machine that offers a powerful grinding and polishing experience. All three models have an aluminum alloy gearbox and is planetary gear driven making it capable of reaching a remarkably flat grind to produce smooth surfaces. Because the machine is gear driven, there is no need for belt changes.
The machine features a folding handle and split body design for a more convenient way to carry and transport. The automatic leveling system has excellent flexibility to evenly grind the floor and perfectly balance the machine.
The magnetic plates make tool changing quick and simple. Strong magnetics keep the tools in place while grinding and polishing, but are easy enough to remove.
- Model: T7 – C
- Voltage: 380-440V | 3PH
- Current: 13A
- Disc Speed: 300-1600 RPM
- Frequency: 50/60 Hz
- Motor: 15 HP
- Grinding Width: 21 Inch (550mm)
- Disc Diameter: 9 Inch X 3 (230mm X 3)
- Weigth: 320 lbs (155 kg)
د.إ23,000.00د.إ23,300.00T7 21″ Electric Grinder
د.إ23,000.00د.إ23,300.00 -
Linda With Tank
The monobrush Linda is suitable for surfacing and cleaning floors made from ceramic or cotto tiles, marble and natural stone for the construction industry.
A full range of accessories to meet all needs.– SINGLE-PHASE 230V~50Hz
– Polypropylene brush Ø 420 mm. Art. 099Two rotation speeds
- Power Engine : 0,9Hp / 0,65Kw
- Machine Dimension in Stock : 57X43X44 cm
- Tank Capacity : 8 lt
- Rotation Speed : 60 rpm
- Speed Selector ii^ Gear: 120 rpm
- Engine Type: Single – Phase 230V-50Hz
د.إ4,950.00د.إ5,000.00Linda With Tank
د.إ4,950.00د.إ5,000.00
