- “Ceramic Profile 300mm Half Around” already exists in your wishlist
-
Aardwolf Slab Lifter
General
The patented Aardwolf Slab Lifter is an accessory for lifting and moving slab-form loads. The Aardwolf Slab Lifter incorporates a spring-loaded latch that automatically releases the lifter from the slab once the slab has been fully lowered to the ground. This makes the process of lifting and lowering of slabs a one-man operation.Features
- Size: Being of a compact construction, the Aardwolf Slab Lifter allows for close packed stone slabs to be lifted out of racks and containers. Lower height slabs placed alongside of taller slabs offer no problem, as is the case with scissor clamps.
- Versatile: Ideal for construction work. Because the clamping mechanism is to the front of the slab, they allow panels to be placed close against walls.
- Safety: Requires only a small movement of the slab to engage and grip the slab, which is generally well below the over balance angle thus eliminating the danger to the operator.
- Secure: The Aardwolf clamps grip marble and granite slabs firmly. The Aardwolf Slab Lifter has a force-multiplying factor of approximately 2.5 to 1.
FAQ
Specifications for AL30
Metric(mm-kg)Imperial(inch-lb)Grip range 0 – 30 mm Working load limit 1200 2646 Price range: د.إ2,900.00 through د.إ3,200.00Aardwolf Slab Lifter
Price range: د.إ2,900.00 through د.إ3,200.00 -
Tool Vor 3 compensation 20
Vor 3 Copensation 20 is a tool for the bushammering finish of flat surfaces on granite and sandstone.
Achievable finishes:
fine nicking
Rotation speed: 1.400 Giri/min max
Weight: 20 kg
Production with portable machines on flat surfaces
Machinable material: Granite/Sandstone
د.إ3,780.00د.إ3,800.00Tool Vor 3 compensation 20
د.إ3,780.00د.إ3,800.00 -
Tool Vor 4 Abrax /800 Ø 260 mm
Vor 4 Abrax is a tool for the sandblasting finish of flat surfaces on marble and limestone.
Achievable finishes:
sandblasting 800 grain size
Rotation speed: 1.400 Giri/min max
Weight: 8 kg
Production with portable machines on flat surfaces
Machinable material: Marble/Limestone
د.إ2,500.00د.إ2,600.00Tool Vor 4 Abrax /800 Ø 260 mm
د.إ2,500.00د.إ2,600.00 -
Tool Vor 4/18 ø260mm
Vor 4/18 is a portable tool for the bushammering finish of flat surfaces on marble and limestone.
Achievable finishes:
medium bushammering
fine bushammeringRotation speed: 1.400 Giri/min max
Weight: 8 kg
Production with portable machines on flat surfaces
Machinable material: Marble/Limestone
د.إ2,500.00د.إ2,550.00Tool Vor 4/18 ø260mm
د.إ2,500.00د.إ2,550.00 -
Birba
Finish
> Scratching step 5 mm
> Scratching step 2,5 mm
> Combed
> Rolling grain size 2000
> Rolling grain size 1400
> Rolling grain size 800
> Rolling grain size 400
> In line bushammered antiskid
> GroovingProcessing type
> on flat surfaces
> antiskidMaterial
> Marble/Limestone
> Granite/SandstoneBirba is an electric tool holder machine to make antiskids and finishes on flat surfaces of marble, stone and granite. Birba tools are divided into short for antiskids and long for finishes on flat surfaces.
Birba is a machine specifically designed for antiskids. It has an innovative guide group which allows very precise adjustments even if it keeps small size to work on stairs already laid.PERFORMANCE
√ Machine in compliance with CE standards.
√ Wide range of tools for many finishes.
√ It has a connector for the suction pipeد.إ3,950.00د.إ4,000.00Birba
د.إ3,950.00د.إ4,000.00 -
Vor
Finish
> fine nicking
> medium bushammering
> fine bushammering
> sandblasting 1400 grain size
> sandblasting 800 grain size
> sandblasting 400 grain sizeProcessing type
> On flat surfacesMaterial
> Marble/Limestone
> Granite/SandstoneVor is a portable machine for bushammering, sandblasting and nicking finish of flat surfaces on marble and granite.
Vor has the patented system of the glide which allows the adjustment of two types of bushammering finish and allows to work eventually the whole slab surface, as it avoids problems of chipping of the edges and loss of control of the machine.APPLICATION
Vor can be used standing up on floors and slabs laid on the ground, or for bench operations thanks to the removable extension of the handle.
PERFORMANCE
√ Easy to use.
√ It has the advantages of coming from the system of the glide.
√ Opportunity to work on thin or defective slabs.
√ Opportunity to work standing up or at the bench with the same machine.
√ It has a connector for the suction pipe.د.إ5,650.00د.إ5,700.00Vor
د.إ5,650.00د.إ5,700.00 -
Dia-Rollex
Finish
> rolling 2000 grain size
> rolling 800 grain size
> rolling 400 grain sizeProcessing type
> on flat surfaces
> edgesMaterial
> Granite/SandstoneDia-Rollex is a tool for the rolling finish of granite and sandstone.
Dia-Rollex is made with an application of brazed grit of different sizes depending on the desired finish, in order to make a perfect rolling effect.
The inserts of the Dia-Roker for the grinder are designed to have a long life as they can be used in all its vertices by rotating them, thus multiplying the tool life.APPLICATION
Dia-Rollex ø115 and Dia-Roker ø115 with the protection cover can be applied to the grinder Bosch GPO 14 CE while Dia-Rollex ø80 can be applied to the mini grinder. They can also be applied to different grinders, but only on specific request. It is compatible with M14 or 5/8” attachment depending on the grinder on which it is applied.
PERFORMANCE
√ Easy to use.
√ Opportunity to work on thin or defective slabs.
√ Work is totally safe because the tool is always covered by the protectionد.إ3,900.00د.إ4,000.00Dia-Rollex
د.إ3,900.00د.إ4,000.00 -
Rollex
Finish
> rolling 2000 grain size
> rolling 1400 grain size
> rolling 800 grain size
> rolling 400 grain sizeProcessing type
> on flat surfaces
> edgesMaterial
> Marble/Limestone
> Granite/SandstoneRollex is tool for the rolling finish on marble, stone, and granite.
Rollex is made with an application of tungsten carbide grit of different sizes depending on the desired finish, in order to make a perfect rolling effect. The inserts of the Roker for the grinder are designed to have a long life as they can be used in all its vertices by rotating them, thus multiplying the tool life.APPLICATION
Rolling rollers can be applied to the grinder Bosh GPO 14 CE. They can also be applied on different grinders, but only on specific request. It is compatible with M 14 or 5/8″ attachment depending on the grinder on which it is applied.
PERFORMANCE
√ Easy to use.
√ Opportunity to work on thin or defective slabs.
√ Work is totally safety because the tool is always covered by protection.د.إ1,400.00د.إ1,450.00Rollex
د.إ1,400.00د.إ1,450.00 -
Piko
Finish
> in line comma
> crossing comma
> 45° commaProcessing type
> on flat surfacesMaterial
> Marble/LimestonePiko is a tool for inline comma finish on marble and limestone.
Piko is designed to be a simple tool and with a heavyweight which offers the possibility to make inline comma finish, usually impossible with a portable tool due to the depth of the finish.APPLICATION
It can be applied to the grinder Bosh GPO 14 CE and Rupes LH32EN. It can also be applied to different grinders, but only on specific request. Piko is compatible with M 14 or 5/8″ attachment depending on the grinder on which it is applied.
PERFORMANCE
√ Easy to use.
√ Work in totally safety because the tool is always covered by protection.
√ Different kind of in line comma finishes with only one tool.د.إ1,360.00د.إ1,500.00Piko
د.إ1,360.00د.إ1,500.00 -
Micra
Finish
> medium bushammering
> fine bushammeringProcessing type
> on flat surfaces
> antiskid
> edges
> bullnoseMaterial
> Marble/Limestone
> Granite/SandstoneMicra is a tool for bushammering of flat surfaces, antiskid, edges, and bullnoses on marble, stone and granite with the universal attachment for mini grinders.
Its protection can be easily fixed on any kind of mini grinder. It uses the system of the glide which allows making two different kinds of bushammering finish, the bullnose and it protects the slab edges from chipping.APPLICATION
It can be applied to the mini grinder Bosh GWS 17-125 INOX. It can also be applied to different grinders, but only on specific request.
PERFORMANCE
√ Easy installation and use on every kind of mini grinder.
√ It has the advantages of coming from the system of the glide.
√ Opportunity to work on thin or defective slabs.
√ It has the connector for the suction pipeد.إ2,800.00د.إ3,000.00Micra
د.إ2,800.00د.إ3,000.00 -
Tanga 4
Finish
> medium bushammering
> fine bushammering
> sandblasting 1400 grain size
> sandblasting 800 grain size
> sandblasting 400 grain sizeProcessing type
> on flat surfaces
> antiskid
> edges
> bullnoseMaterial
> Marble/Limestone
> Granite/SandstoneTanga 4 is a tool for bushammering and sandblasting of flat surfaces, antiskid, edges and bullnoses on marble, stone and granite with universal attachment for grinders.
Tanga 4 is a portable tool for antiskid. Its protection can be easily fixed on any kind of grinders and it can hold 9 different rollers for bushammering and sandblasting finish on any material.APPLICATION
It can be applied to the grinder Bosh GPO 14 CE. It can also be applied on different grinders, but only on specific request.
د.إ3,450.00د.إ3,500.00Tanga 4
د.إ3,450.00د.إ3,500.00 -
Stona
Finishes
> Medium bushammering
> Fine Bushammering
> Sandblasting 1400 grain size
> Sandblasting 800 grain size
> Sandblasting 400 grain sizeProcessing type
> On flat surfacesMaterial
> Marble/Limestone
> Granite/SandstoneAPPLICATION
Stona is provided with universal attachment and can be fitted to all the grinders. Moreover, is compatible with M14 or 5/8″ attachment depending on the grinder on which it is applied.
PERFORMANCE
√ Easy to use.
√ It has the advantages coming from the system of the glide.
√ Opportunity to work on thin or defective slabs.
√ It has a connector for suction pipe.د.إ2,270.00د.إ2,300.00Stona
د.إ2,270.00د.إ2,300.00
