-
Aquasil Flex
Flexible, two- component brushable cement based sealing mortar
- For complete and permanent waterproofing of concrete, brickwork, plasters.
- Ability to bridge surface cracks.
- Ideal for waterproofing surfaces that show or are expected to show hairline cracks due to thermal contractions-expansions or vibrations like surfaces to be covered with tiles on balconies, terraces, pools and bathrooms, inverted roof insulation, walls and floors of basements, tanks, wells, canals, etc.
- Endures positive and negative hydrostatic pressure and the surface remains water vapor permeable.
- Suitable for contact with drinking water.
- Application thickness (2 coats): ≤ 5mm and ≥ 2mm
CONSUMPTION: 2-4 kg/m²
-
General Transparente
Polyester adhesive/glue transparent fluid, thixo vertical/solid, semisolid.
For stuccoing, repairing and gluing of:
Marbles • Natural stones • Agglomerates and terrazzo tiles
Main properties:
High stability • Highly long lasting • High workability
How to use: Apply on dry and clean materials. Hardening through paste catalyst (2-3%).
The hardened adhesive is workable after 2-5 hours. Request the Technical Data Sheet.
Technical data: Viscosity: Fluid 1000 – 1500 cPs. Viscosity: Vertical/Solid 200000-300000 cPs. Viscosity: Semisolid 150000-250000 cPs.
Mixing time: 1 minute. Application time: 1 to 4 minutes. Hardening time at 20°C/68°F: 6 to 9 minutes. Use temperature after hardening: min. 0°C/32°F – max. 110°C/230°F.
Stability: 6 months into the original sealed containers at temperature of 15°C-25°C (59°F-77°F).
Packaging: 20Kg -
KS 55
Special polyester adhesive transparent fluid with crystalline transparency “glass effect” and vertical/solid (colourless, neutral).
For stuccoing, repairing and gluing of:
Marbles • Granites • Natural stones • Agglomerates and terrazzo tiles
Main properties:
Very high transparency • Good stability • Highly long lasting • High workability
How to use:
Apply on dry and clean materials. Hardening through special liquid catalyst (2-3%). The hardened adhesive is workable after 2-5 hours. Request the Technical Data Sheet.
Technical data:
Viscosity: Fluid 1000 – 1500 cPs.
Viscosity: Vertical/Solid 200000-300000 cPs. Mixing time: 1 minute.
Application time: 5 to 7 minutes.
Hardening time at 20°C/68°F: 20 to 30 minutes. Use temperature after hardening: min. 0°C/32°F – max. 110°C/230°F.
Stability: 6 months into the original sealed containers at temperature of 15°C-25°C (59°F-77°F).
Packaging: 1 L. -
Rockany Plaster Bond
Rockany Plasterbond is a single component polymerised resin emulsion for plastering applications.
Rockany Plasterbond provides excellent workability and bond strength. Eliminates cracks on plaster. Increase strength.
Uses» Plaster Bonding Purposes
» Repair primer
» Bonding agent
» Admixture for cement and mortar.Packing
Available in 20 ltr & 200 ltr
-
Rockany Poxy RP-2K
RockanyPoxy RP 2K is a Two-Component Epoxy Adhesive system with an advanced formulation. Especially for the porous and non-porous substrates.
Uses
» Permanent installation of tiles, marbles, mosaics, and stones on concrete, plaster, metal, and wood surfaces.
» Used as an adhesive for metal, wood, natural stone, marble, ceramic tiles, rubber, and concrete.
» Resists boiling water and acid splashing in addition to a germ proof seal in hospitals, abattoirs, catering, kitchens, and laboratories.
» Bonds to new and old concrete, and plaster, concrete and metal/steel plates, etc.
» Anchoring of bolts, doors, windows, anchor bars.
» Watertight repairs and structural sealing of cracks, holes, honeycomb, and rigid joints.
» Recommended for heavy traffic areas, permanent wet areas, swimming pools, and utility.Packing
Available in 10 kg set
CLASSIFICATION ACCORDING TO EN 12004
RockanyPoxy RP-2k is a classified reactive (R) improved (2) adhesive with no vertical slip (T) -
Rockany Tile and Grout
Single Version Cementitious Adhesive & Grout. Rockany Tile and Grout is a new generation multipurpose latex modified cementitious water-resistant adhesive and grout used for permanent fixing of mosaics and glass mosaics.
Uses
» Specially formulated for permanent wet areas
» Interior and exterior mosaics fixing and grouting applications.
» Recommended for Swimming Pools, Fountains, Bathrooms, kitchens, and permanent wet areas.
» Recommended for ceramic tiles, glass mosaics, porcelain tiles, quartz stone marble, and stones.
» Recommended substrates are Concrete, Screed, Plaster. Plywood, Silicate, Gypsum Board & MDF with support of priming.Packing
Available in 20 kg Bag
Rockany Tile And Grout meet the classifications requirements C2TE according to EN 12004.
-
Rockany Grout PLM
RockanyGrout PLM is polymer latex modified water-resistant grout that has water repellence, excellent adhesion, high bonding strength, workability, and permanent joint, which is non-shrinking, non-toxic.
Uses
» RockanyGrout is used for grouting of ceramic tiles, marble, natural stone edges.
» Specially formulated for wet or submerged grouting applications such as:- swimming pool, bathrooms, toilets fountains and kitchen.
» Rockany Grout PLM recommended for external and heavy traffic areas.
» Recommended for residential and commercial
» Grouting application joint width up to 6 mm.
PackingAvailable in 5 Kg bags
Available in a different color -
Penta Synergy CNC Profile
The innovational Woosuk’s diamond tooling system provides a new concept of CNC profile system.
It is designed to build with quality, performance, and speed as its driving force.
Saving cost 30%
Saving working time : 40%
Ensure cost-effectiveness and saving working time compared to other systems on the market. The cost-effective way to cut your budget and fabrication time dramatically with the great polishing results.
For straight edge only 4 steps recommendable (Pos#l – Pos#4)
-
Line Breaker System for CNC
This new unique resin bond and metallic bond eliminate all scratches left by previous position wheels and allow perfect polishing result with POS4, 5 and 6. It can apply line trouble shooting to forms : A, T, AR, ZR and ZS.
- LB-POS#1: BRAZED-DEEP SCRATCHES
- LB-POS#2: BRAZED-LIGHT SCRATCHES
- LB-POS#3: METALLIC, RESIN-PRE POLISHING
-
Brazed Finger Bit for CNC
These CNC bits are designed for engineered stone and marble. Upgraded long life brazed bonds provide a smooth cut and long life. Faster cutting speed and excellent cutting finish. Various sizes are available.
- BFB-25: 25mm L X 19mm D
- BFB-35: 35mm L X 19mm D
- BFB-45: 45mm L X 19mm D
- BFB-55: 55mm L X 19mm D
- BFB-65: 65mm L X 19mm D
-
Brazed Milling Wheel for CNC
Extreme lifetime brazed milling wheel provides the correct thickness and size.
- GAUG-20 : 87 X 20 X 5mm Milling Wheel
- GAUG-30 : 91 X 30 X 7mm Milling Wheel
-
Angled Milling Wheel
This angled milling wheel is designed to achieve aggressive stock removal for drainboard job with maintaining the precise angle. This quick stock removal will bring the distinguished improvement to productivity. In the case of getting along with our drainboard polishing system, you can get the optimum polishing result.
- SAMW45 : 45• Angled Milling Wheel
- SAMW60 : 65• Angled Milling Wheel
Shop By Catagory
- Aardwolf-Frames
- Art Equipment
- Battipav
- Bush Hammering
- Electroplated Profiling
- Floor Polishing Machinery
- Forklift Equipment
- Grinding Tool
- Grooving Disc
- JIB Cranes
- Lifting & Clamp
- Montolit
- Polishing Powders & Wax
- Polishing Stones
- Polishing-Pads
- Power Tools & Machinery
- Automatic Polishing
- CNC Tools-woosuk
- Cutting Grinding & Shaping
- Floor Polishing
- General Chemical
- ILPA
- Kemistone
