-
Piko
Finish
> in line comma
> crossing comma
> 45° commaProcessing type
> on flat surfacesMaterial
> Marble/LimestonePiko is a tool for inline comma finish on marble and limestone.
Piko is designed to be a simple tool and with a heavyweight which offers the possibility to make inline comma finish, usually impossible with a portable tool due to the depth of the finish.APPLICATION
It can be applied to the grinder Bosh GPO 14 CE and Rupes LH32EN. It can also be applied to different grinders, but only on specific request. Piko is compatible with M 14 or 5/8″ attachment depending on the grinder on which it is applied.
PERFORMANCE
√ Easy to use.
√ Work in totally safety because the tool is always covered by protection.
√ Different kind of in line comma finishes with only one tool.د.إ1,360.00د.إ1,500.00Piko
د.إ1,360.00د.إ1,500.00 -
Rollex
Finish
> rolling 2000 grain size
> rolling 1400 grain size
> rolling 800 grain size
> rolling 400 grain sizeProcessing type
> on flat surfaces
> edgesMaterial
> Marble/Limestone
> Granite/SandstoneRollex is tool for the rolling finish on marble, stone, and granite.
Rollex is made with an application of tungsten carbide grit of different sizes depending on the desired finish, in order to make a perfect rolling effect. The inserts of the Roker for the grinder are designed to have a long life as they can be used in all its vertices by rotating them, thus multiplying the tool life.APPLICATION
Rolling rollers can be applied to the grinder Bosh GPO 14 CE. They can also be applied on different grinders, but only on specific request. It is compatible with M 14 or 5/8″ attachment depending on the grinder on which it is applied.
PERFORMANCE
√ Easy to use.
√ Opportunity to work on thin or defective slabs.
√ Work is totally safety because the tool is always covered by protection.د.إ1,400.00د.إ1,450.00Rollex
د.إ1,400.00د.إ1,450.00 -
Stona
Finishes
> Medium bushammering
> Fine Bushammering
> Sandblasting 1400 grain size
> Sandblasting 800 grain size
> Sandblasting 400 grain sizeProcessing type
> On flat surfacesMaterial
> Marble/Limestone
> Granite/SandstoneAPPLICATION
Stona is provided with universal attachment and can be fitted to all the grinders. Moreover, is compatible with M14 or 5/8″ attachment depending on the grinder on which it is applied.
PERFORMANCE
√ Easy to use.
√ It has the advantages coming from the system of the glide.
√ Opportunity to work on thin or defective slabs.
√ It has a connector for suction pipe.د.إ2,270.00د.إ2,300.00Stona
د.إ2,270.00د.إ2,300.00 -
Tool Vor 4/18 ø260mm
Vor 4/18 is a portable tool for the bushammering finish of flat surfaces on marble and limestone.
Achievable finishes:
medium bushammering
fine bushammeringRotation speed: 1.400 Giri/min max
Weight: 8 kg
Production with portable machines on flat surfaces
Machinable material: Marble/Limestone
د.إ2,500.00د.إ2,550.00Tool Vor 4/18 ø260mm
د.إ2,500.00د.إ2,550.00 -
Tool Vor 4 Abrax /800 Ø 260 mm
Vor 4 Abrax is a tool for the sandblasting finish of flat surfaces on marble and limestone.
Achievable finishes:
sandblasting 800 grain size
Rotation speed: 1.400 Giri/min max
Weight: 8 kg
Production with portable machines on flat surfaces
Machinable material: Marble/Limestone
د.إ2,500.00د.إ2,600.00Tool Vor 4 Abrax /800 Ø 260 mm
د.إ2,500.00د.إ2,600.00 -
Micra
Finish
> medium bushammering
> fine bushammeringProcessing type
> on flat surfaces
> antiskid
> edges
> bullnoseMaterial
> Marble/Limestone
> Granite/SandstoneMicra is a tool for bushammering of flat surfaces, antiskid, edges, and bullnoses on marble, stone and granite with the universal attachment for mini grinders.
Its protection can be easily fixed on any kind of mini grinder. It uses the system of the glide which allows making two different kinds of bushammering finish, the bullnose and it protects the slab edges from chipping.APPLICATION
It can be applied to the mini grinder Bosh GWS 17-125 INOX. It can also be applied to different grinders, but only on specific request.
PERFORMANCE
√ Easy installation and use on every kind of mini grinder.
√ It has the advantages of coming from the system of the glide.
√ Opportunity to work on thin or defective slabs.
√ It has the connector for the suction pipeد.إ2,800.00د.إ3,000.00Micra
د.إ2,800.00د.إ3,000.00 -
Kinki
Finish
> coarse commaProcessing type
> on flat surfacesMaterial
> Marble/LimestoneKinki is a tool for coarse comma finish on marble and limestone. Kinki can be fixed on manual polishing machines to work on slabs and tiles, to work on floors already laid it can be fixed also on floor polishing machines.
The rollers with a special disposition of the bit give a Coarse Comma finish.APPLICATION
The tool must be fixed on the holding plate of the polishing machine and work as a normal polishing tool.
PERFORMANCE
√ Easy installation and use.
√ Uniform finish over the whole slab surface.
√ High production and new finishes with minimum investment.د.إ3,200.00د.إ3,300.00Kinki
د.إ3,200.00د.إ3,300.00 -
Spunty
Finish
> coarse nicking
> fine nickingProcessing type
> on flat surfacesMaterial
> Marble/Limestone
> Granite/SandstoneSpunty tools are tools for nicking finish on marble, limestone, granite and sandstone.
The special bits give Nicking finish.APPLICATION
tool must be fixed on the hold plate of the polishing machine and work as a normal polishing tool.
PERFORMANCE
√ Easy installation and use.
√ Uniform finish over the whole slab surface.
√ High production with minimum investment.د.إ3,200.00د.إ3,250.00Spunty
د.إ3,200.00د.إ3,250.00 -
Tanga 4
Finish
> medium bushammering
> fine bushammering
> sandblasting 1400 grain size
> sandblasting 800 grain size
> sandblasting 400 grain sizeProcessing type
> on flat surfaces
> antiskid
> edges
> bullnoseMaterial
> Marble/Limestone
> Granite/SandstoneTanga 4 is a tool for bushammering and sandblasting of flat surfaces, antiskid, edges and bullnoses on marble, stone and granite with universal attachment for grinders.
Tanga 4 is a portable tool for antiskid. Its protection can be easily fixed on any kind of grinders and it can hold 9 different rollers for bushammering and sandblasting finish on any material.APPLICATION
It can be applied to the grinder Bosh GPO 14 CE. It can also be applied on different grinders, but only on specific request.
د.إ3,450.00د.إ3,500.00Tanga 4
د.إ3,450.00د.إ3,500.00 -
Abrax
Finishes
> Sandblasting grain 1400
> Sandblasting grain 800
> Sandblasting grain 400Processing type
>On flat surfacesMaterial
> Marble/LimestoneAbrax is a tool for sandblasting finish grain size 1.400, 800, 400 on marble and limestone.
Abrax is a patented tool which has rollers with an application of tungsten carbide grit of different sizes depending on the desired finish, in order to make a perfect sandblasting effect. It has also the system of the glide which allows a uniform finish over the whole slab surface, even near the edges.APPLICATION
The tool must be fixed on the holding plate of the polishing machine and work as a normal polishing tool.
PERFORMANCE
√ Easy installation and use.
√ Opportunity to work on naturally punched materials.
√ Opportunity to work on thin or defective slabs.
√ Uniform finish over the whole slab surface.
√ High production with minimum investment.د.إ3,470.00د.إ3,500.00Abrax
د.إ3,470.00د.إ3,500.00 -
Tool Vor 3 compensation 20
Vor 3 Copensation 20 is a tool for the bushammering finish of flat surfaces on granite and sandstone.
Achievable finishes:
fine nicking
Rotation speed: 1.400 Giri/min max
Weight: 20 kg
Production with portable machines on flat surfaces
Machinable material: Granite/Sandstone
د.إ3,780.00د.إ3,800.00Tool Vor 3 compensation 20
د.إ3,780.00د.إ3,800.00 -
Dia-Rollex
Finish
> rolling 2000 grain size
> rolling 800 grain size
> rolling 400 grain sizeProcessing type
> on flat surfaces
> edgesMaterial
> Granite/SandstoneDia-Rollex is a tool for the rolling finish of granite and sandstone.
Dia-Rollex is made with an application of brazed grit of different sizes depending on the desired finish, in order to make a perfect rolling effect.
The inserts of the Dia-Roker for the grinder are designed to have a long life as they can be used in all its vertices by rotating them, thus multiplying the tool life.APPLICATION
Dia-Rollex ø115 and Dia-Roker ø115 with the protection cover can be applied to the grinder Bosch GPO 14 CE while Dia-Rollex ø80 can be applied to the mini grinder. They can also be applied to different grinders, but only on specific request. It is compatible with M14 or 5/8” attachment depending on the grinder on which it is applied.
PERFORMANCE
√ Easy to use.
√ Opportunity to work on thin or defective slabs.
√ Work is totally safe because the tool is always covered by the protectionد.إ3,900.00د.إ4,000.00Dia-Rollex
د.إ3,900.00د.إ4,000.00
Shop By Catagory
- Aardwolf-Frames
- Art Equipment
- Battipav
- Bush Hammering
- Electroplated Profiling
- Floor Polishing Machinery
- Forklift Equipment
- Grinding Tool
- Grooving Disc
- JIB Cranes
- Lifting & Clamp
- Montolit
- Polishing Powders & Wax
- Polishing Stones
- Polishing-Pads
- Power Tools & Machinery
- Automatic Polishing
- CNC Tools-woosuk
- Cutting Grinding & Shaping
- Floor Polishing
- General Chemical
- ILPA
- Kemistone
