Superior adhesive based on hybrid resins, semisolid, transparent matt. Can be coloured.
For bonding and stuccoing of:
Synthetic agglomerates and engineered stones • Natural stones • Marble • Granite • Ceramics
Main characteristics:
Excellent mechanical characteristics • Semisolid consistency for a better knife grade • Very good chemical resistance also on alkaline supports • Good adhesion on all kind of natural and artificial stone having enough porosity • Fast hardening (7-10 minutes) • Low exothermal peak for a modest shrinkage • Leave the surface dry without greasiness for an easy honing and polishing
How to use: Apply on dry and clean materials free from greasy or alien substances and friable parts. Mix with a 2% max. of hardener. Application temperature between +10°C and +30°C (50°F and 86°F).
Technical data:
Hardening time: 7 to 10 minutes. Complete catalysis after 24 hours. Working time: 3 to 5 minutes.
Packaging: can of 1 L. complete with hardener.

Polyester adhesive/glue fluid, thixo vertical/solid, semisolid.
Colours: straw/beige, white, black, grey, red, travertine or other colours. Can be coloured with General’s special colour paste “Base Colore”. Special colours on demand and according to the quantity.
For stuccoing, repairing and gluing of:
Marbles • Natural stones • Agglomerates and terrazzo tiles
Main properties:
High stability • Highly long lasting • High workability
How to use: Apply on dry and clean materials. Hardening through paste catalyst (2-3%) The hardened adhesive is workable after 2-5 hours. Request the Technical Data Sheet.
Technical data: Viscosity: Fluid 30000-60000 cPs. Viscosity: Vertical/Solid 250000-300000 cPs. Viscosity: Semisolid 150000-250000 cPs.
Mixing time: 1 minute. Application time: 1 to 4 minutes. Hardening time at 20°C/68°F: 4 to 6 minutes. Use temperature after hardening: min. 0°C/32°F – max. 110°C/230°F.
Stability: 6 months into the original sealed containers at temperature of 15°C-25°C (59°F-77°F).
Packaging: 1Kg, 28Kg

Epoxy-polyester adhesive, fluid, semisolid. Colours: straw/beige, white, black, grey, red, travertine or other colours on demand. Can be coloured with General’s special colour paste “Base Colore”. Special colours on demand and according to the quantity.
For bonding and repairing of:
Granites • Marbles • Natural stones • Engineered stones • Agglomerates and terrazzo tiles • Cement • Iron
Main properties:
Permanent bonding also in difficult situations of stone materials and of not homogeneous materials (stone, cement, iron).
Very high seal • Fast grip • Minimum shrinkage • High workability
How to use: Apply on dry and clean materials. Hardening through paste catalyst (2-3%).
The hardened adhesive is workable after 2-5 hours. Request the Technical Data Sheet.
Technical data: Viscosity: Fluid 30000-60000 cPs. Viscosity: Semisolid 200000-250000 cPs.
Mixing time: 1 minute. Application time: 1 to 4 minutes.
Hardening time: 4 to 6 minutes at 30°C/86°F, 7 to 12 minutes at 20°C/68°F, 15 to 20 minutes at 10°C/50°F. Use temperature after hardening: min. 0°C/32°F – max. 100°C/212°F.
Stability: 6 months into the original sealed containers at temperature of 15°C-25°C (59°F-77°F).
Packaging: 1L

Reviver and polisher for polished surfaces.
For:
Enhancing the glossy of the traditional polishing
Main properties:
Gives to the surface an immediate and superior gloss • Restore the original polish • Anti-static effect repelling the accumulation of the dust
How to use: Apply on the clean and dry surface with a clean cotton cloth or tampon and rub gently to favour the penetration and to avoid haloes. Request the Technical Data Sheet.
Technical data: Product containing natural and synthetic polymers in organic solvents
Density at 23°C (73.4°F): 0,90 kg/l. Drying: 10 to 20 minutes according to environment conditions.
Storage: far from heat sources; avoid temperatures lower than +5°C (41°F) and higher than +35°C (95°F).
Packaging: 1L

Waterproofing sealer for the building industry.
For:
Waterproofing treatment for porous and absorbing materials such as stones, cement, concrete, sight brick walls, bricks, mineral plasters and masonry, fiber-cement panels
Main properties:
Develops an effective water repellent barrier, antismog, anti-mould, UVrays stable • High resistance to the alkaline environment, acid rains, atmospheric agents •
Keep unchanged the natural capacity of transpiration of the material
How to use: Apply evenly on the clean and dry surface with a clean cotton cloth avoiding the accumulating of excess of product on the surface. Request the Technical Data Sheet.
Technical data: Solvent based product. Density at 23°C (73.4°F): 0,87 kg/l. Consumption depends on the number of applications. Complete protection 24 hours after the final application.
Storage: far from heat sources; avoid temperatures lower than +5°C (41°F) and higher than +35°C (95°F).
Packaging: 5 L.

Crystallizer for marble, terrazzo and marble agglomerate. Environmentally friendly.
For:
Crystallization of the surfaces based on calcium carbonate such as marble, terrazzo tiles, marble agglomerates having lost the original shine
Main properties:
Fast and economic restoration of the specular gloss of the marble floors
How to use: On the dry floor, spread small quantities of crystallizer and work with single-brush machine equipped with pad for crystallization until the complete drying of the floor. Request the Technical Data Sheet.
Technical data: Water based product. Contains: emulsion of waxes and microcrystalline substances. Density at 23°C (73.4°F): 1,oo kg/l. Consumption: according to the degradation of the surface.
Storage: avoid temperatures lower than +5°C (41°F) and higher than +35°C (95°F).
Packaging: 1 L.

Corrector for marble, granites, natural stones.
For:
Superficial correction of the colour for marble, granites, natural stones both grinded and polished
Main properties:
Attenuation of superficial light marks and light imperfections, natural or structural or developed during the polishing • Natural shade more homogeneous by using the adequate colour • Colours beige, white, yellow, grey, brown, light and antique pink, light and dark red, light and dark green, transparent for different materials • Application not film-making, irreversible, resistant to UV rays • Long lasting during the years
How to use: On the perfectly clean and dry surface, apply evenly with a clean cotton cloth avoiding the accumulating of excess of product. Request the Technical Data Sheet.
Technical data: Product containing resinoid compounds, photostable substances and solvents.
Density at 23°C (73.4°F): 0,944 kg/l. Consumption: 15 to 20 sqm/litre.
Storage: far from heat sources; avoid temperatures lower than +5°C (41°F) and higher than +35°C (95°F).
Packaging: 1 L.